hey guys here’s the completed shockmount
ninja sword I decided to call it the
taser saber for short basically you have
the eight point eight million volt stun
gun attached to these two swords with
some nylon bolts to ground the positive
and negative switch here switch here and
the power goes from here up this line
this is just aesthetics blue wires black
electrical tape zip ties hose clamp
so it’s pretty self-explanatory I’ll go
into some more details but first I’m
going to give you a quick demo so I’m
going to put on some gloves this is just
a safety precaution they’re not going to
do anything because the electricity will
go straight through but makes me feel
better so why not and they look pretty
so whatever so you turn it on here get
that and then right there
so it’s being charged from this little
cable here and doesn’t need to be
plugged in whenever you use it so pretty
much works as planned and I’ll just show
you in a minute I’m just going to go
over a little bit of the design
basically you have the nylon bolts
keeping it together and you have this
sliding door closet assembly and you can
find this at Home Depot or wherever you
just need those little nylon things and
basically you have six layers but you’re
only using four so two are in full and
the other two are cut in half and
layered on top of each other so you get
three layers on each side and that just
helps to build up the handle so you can
better adapt the Taser this is a
flashlight momentary switch there’s five
pressure switches so that you have a
better ability to activate the sword and
also by by having this nice and
supported with this hose clamp
you can extend your range so you can jab
farther and also gives you the ability
to have a double handed grip so you get
a better swing more control more
maneuverability and that’s pretty much
that so I want to show you real quickly
how it would work on a metal object only
works on conductor bulls so people
zombies are not out of the question so
you’re good in that zone but obviously
this is just for fun you guys are always
talking about fastening and Batman and
all this stuff like obviously you don’t
have any plans but it’s kind of fun just
to play along so guess you could use
this as a pretty good zombie killing
weapon or an assassin weapon but it’s
more of a novelty for me just to say you
know something that I have it’s fun
lying around to play with so I guess
it’s like a a toy if you would so I’ll
just show you real quick another cool
thing is this is still salvageable I
haven’t broken anything everything’s
just been either held in place or or
soldered so you can still assemble it
the normal fashion so it can be a stun
gun again and turn it on this right here
X is kind of a jabbing point so I’ll
just show you real quick so that’s
pretty much that and what’s kind of neat
is as the battery starts to run a little
bit low does this weird thing where the
electricity is drawn to this metal blade
and you can kind of see this like purple
it’s kind of weird I don’t know if you
can see it
you can kind of hear that sizzling you
see it there right on the handle that
purple like dust and what that does is
um basically I got a little bit of
magnetic dust on there an accident and I
kind of prefer this but even though it
doesn’t have that arc it’s not as
intimidating it’s still you know a ninja
weapon so obviously you want it to be
stealthy so you can have it activated
that way when you touch it to the
opponent it does what it has to do
follow all the added hype and noise so
I’ll show you real quick no you don’t
hear that sound sometimes so exactly so
that’s pretty much that hope you guys
like what you see I’m going to be doing
lots of shock mods in the future but if
you guys have any that you’ve tried on
your own go ahead and post a video
response I’d love to see what you guys
can do and also if you just want to post
any comment on what you want to see more
from my channel also if you could give
me a favor and like the video as well as
subscribe and if you have any friends
you feel would be interested go ahead
and share this to your Facebook or
Twitter or whatever but I really
appreciate all my fans and I know I
haven’t been very active but because of
school so I appreciate everyone that’s
been true and loyal so thanks again for
everyone and I hope you enjoyed the
video thanks for watching
you
you
you
ninja sword I decided to call it the
taser saber for short basically you have
the eight point eight million volt stun
gun attached to these two swords with
some nylon bolts to ground the positive
and negative switch here switch here and
the power goes from here up this line
this is just aesthetics blue wires black
electrical tape zip ties hose clamp
so it’s pretty self-explanatory I’ll go
into some more details but first I’m
going to give you a quick demo so I’m
going to put on some gloves this is just
a safety precaution they’re not going to
do anything because the electricity will
go straight through but makes me feel
better so why not and they look pretty
so whatever so you turn it on here get
that and then right there
so it’s being charged from this little
cable here and doesn’t need to be
plugged in whenever you use it so pretty
much works as planned and I’ll just show
you in a minute I’m just going to go
over a little bit of the design
basically you have the nylon bolts
keeping it together and you have this
sliding door closet assembly and you can
find this at Home Depot or wherever you
just need those little nylon things and
basically you have six layers but you’re
only using four so two are in full and
the other two are cut in half and
layered on top of each other so you get
three layers on each side and that just
helps to build up the handle so you can
better adapt the Taser this is a
flashlight momentary switch there’s five
pressure switches so that you have a
better ability to activate the sword and
also by by having this nice and
supported with this hose clamp
you can extend your range so you can jab
farther and also gives you the ability
to have a double handed grip so you get
a better swing more control more
maneuverability and that’s pretty much
that so I want to show you real quickly
how it would work on a metal object only
works on conductor bulls so people
zombies are not out of the question so
you’re good in that zone but obviously
this is just for fun you guys are always
talking about fastening and Batman and
all this stuff like obviously you don’t
have any plans but it’s kind of fun just
to play along so guess you could use
this as a pretty good zombie killing
weapon or an assassin weapon but it’s
more of a novelty for me just to say you
know something that I have it’s fun
lying around to play with so I guess
it’s like a a toy if you would so I’ll
just show you real quick another cool
thing is this is still salvageable I
haven’t broken anything everything’s
just been either held in place or or
soldered so you can still assemble it
the normal fashion so it can be a stun
gun again and turn it on this right here
X is kind of a jabbing point so I’ll
just show you real quick so that’s
pretty much that and what’s kind of neat
is as the battery starts to run a little
bit low does this weird thing where the
electricity is drawn to this metal blade
and you can kind of see this like purple
it’s kind of weird I don’t know if you
can see it
you can kind of hear that sizzling you
see it there right on the handle that
purple like dust and what that does is
um basically I got a little bit of
magnetic dust on there an accident and I
kind of prefer this but even though it
doesn’t have that arc it’s not as
intimidating it’s still you know a ninja
weapon so obviously you want it to be
stealthy so you can have it activated
that way when you touch it to the
opponent it does what it has to do
follow all the added hype and noise so
I’ll show you real quick no you don’t
hear that sound sometimes so exactly so
that’s pretty much that hope you guys
like what you see I’m going to be doing
lots of shock mods in the future but if
you guys have any that you’ve tried on
your own go ahead and post a video
response I’d love to see what you guys
can do and also if you just want to post
any comment on what you want to see more
from my channel also if you could give
me a favor and like the video as well as
subscribe and if you have any friends
you feel would be interested go ahead
and share this to your Facebook or
Twitter or whatever but I really
appreciate all my fans and I know I
haven’t been very active but because of
school so I appreciate everyone that’s
been true and loyal so thanks again for
everyone and I hope you enjoyed the
video thanks for watching
you
you
you
Please follow and like us:
Be First to Comment