Lighter Mod Tutorial: Injecting Weird Stuff!

hey what’s up today I’ll be showing you
how to modify Ronson refillable lighter
so that you can shoot whatever fuel you
choose and all you’ll need you don’t
know is pliers butane fuel refill a
syringe or candle ah some type of way of
filling your ronstan back up from the
top instead of the bottom and then these
are all the parts so basically you take
apart your lighter you’d be left with
these don’t lose them nine parts and
this especially is important for some
reason this little rubber stopper
basically that goes in the bottom and
I’m gonna reassemble it and show you
guys everything but basically you’ll
need to know this part here and this
little stick here is what keeps the gas
from coming out in a liquid so these are
key you have to remove these to modify
your lighter so once those are modified
you’ll fill your lighter back up with
whatever you want
I just filled mine up with a little bit
of water and then you will put it back
together now first you’ll take your
lever if you want to put this little
adjustment you can but I don’t usually
like it for some reason it just gets in
the way so that goes on like this you
want the angle to be sort of going
downward so that goes there and the
farther down you screw this little
nozzle the more of a lever action you’re
gonna have so just keep that in mind
so next you’ll put in the stopper that
just kind of falls down at the bottom
just like that next this guy here take
your pliers
it just goes like that and you can see
how it sort of sits in there I’m gonna
make sure that the nozzle is not being
obstructed by the electric wire and
right now it doesn’t look like it yeah
it’s close but it’s not actually
obstructing it so that’s good that’s
what you want and then you’ll take this
part here and there’s a little knob
right in there it’s kind of hard to see
there you go
right next to it’s a yellow little tab
and that just basically goes on top and
into the spring okay that sticks there
and then you take your button see
there’s a little bit of aerosol already
in there and then to put this back
together you just
I usually clamp it sort of like this and
that way you can sit gonna see it’s a
little bit overlapped and that gives you
just enough tension to slide it over and
then it snaps back in place so that’s it
and refilling your lighter is pretty
simple just put some butane and you can
see how it kind of comes out in a liquid
and that’s shooting the water so if I
had it from like right here and my
target is right there it’s about a foots
distance so you can see it’s kind of
like mixing with the fuel here making
kind of like a foamy next year but does
its job and you can pretty much put
anything you want so be creative
leaving your leave a comments below on
any ideas you have for what you’d put
in the lighter a lot of different
capabilities some of them can be
harmless some of them can be a little
bit harmful so be careful thanks for
watching guys