hey everyone so here is my CNC milling
workstation
just kidding it’s actually an air hockey
table with the x-carve on top of it this
was sent to me by a company called
inventables they’re pretty cool if you
want to check them out I’ll leave like
links in the description but you guys
probably don’t really care but this
thing’s been a godsend because I’ve been
able to cut out multiple parts of my
build for my prototype I’m entering the
Boca bearings innovation contest it’s
really last-minute ends at the end of
the month but it’s voting based so at
the end of each month they pick a winner
whoever has the most votes wins so I
figure if I can have my subscribers help
me out that I can win second or third
place then I can get a 3d printing
machine that will be crazy because I’d
be able to build so much more stuff so
much more efficiently and make it clean
I won’t have to worry about finding the
right product I mean in the past what
I’ve had to do is find something and
then take it apart and add pieces to it
to make it work so let’s say I wanted to
make this thing shoots fireballs that
would be awesome
but I’d have to work around the plastic
that already exists here now if I could
3d print this thing from scratch I could
hold have this thing completely hollow I
wouldn’t have to do any like machining
and I could probably make like a couple
of these and then give them to people or
have little kits so if you want to
create your own fireball launcher or
something you know it’s much more
plausible because a lot of people don’t
have the tools that I could start
selling kits in a long run I really want
to create a company that helps people
and creates like you know for military
or for like you know civilian use to
protect themselves like I think this is
a really good idea the electric glove
and maybe combining it with this because
you have that same trigger with the like
wrist action so if you guys haven’t seen
that there’s this video definitely check
it out it’s the Iron Man 3 stun glove
and this is the gavel bowing now this is
another example of how a 3d printer
would really help me
this right here took me a couple hours
because I
had to cut this out by hand using a
dremel tool and then glue it all
together sand all the edges to make sure
that it was all nice and looks you know
professional and then make sure and pray
that it didn’t fall apart whereas if I
had a 3d printer I could just make this
whole entire thing from scratch probably
make the little battery clips right here
and just put them in and then you know
I’d be good to go and I could sell these
battery clips on a website you know
because all this stuff it’s expensive
you know it it’s kind of like I’m it’s
like I’m swimming but I’m like
constantly drowning you know and I’m
like now I get to the point where it’s
like alright I’m good and then something
happens and you know the YouTube videos
don’t release as well as I hoped you
guys would have enjoyed it you know
obviously trying my best and you know
sometimes I just like to explore an
option just for the fun of it so you
know keep that in mind sometimes I do
things because it seems like fun to be
creative you to be creative and try
something new
it’s not always the most effective
option but I think it’s entertaining I
think that’s what YouTube is about you
know having fun and being entertained
but at the same time in the future I
want this YouTube channel to expand into
a company that can help people so I
think having the right tools is the best
way to go so I you know thank God I had
the Inventables x-carve
sent to me so that I can cut these
things out and this saves me so much
time I’m gonna have to cut out like a
whole bunch of these for my invention to
work it’s kind of still not exactly
clear what I’m gonna do yet I don’t know
if I want to just say it on camera I
mean I guess I could it’s gonna be some
sort of shield I’ll say that much like
shields are really cool and I want to
work with them I think they’re fun I
think technology is really moving where
materials can be a lot more dense than
they seem like if you guys ever seen
that a spray that’s red they put it on
like on like Dixie Cups and a sumo
wrestler stood on top of them and it
didn’t break it’s ridiculous what
they’re coming out with with chemical
bonding and like barriers that they’re
able to create whenever they carefully
so that’s kind of what I’ve been doing
recently I’m gonna try and have some
more simple builds because I
get really caught up in a long build and
then having people not and really enjoy
it so it seems like you know people like
some of these like little hacks and
stuff like that like like mic packs and
I have a lot of them that you haven’t
seen before and I’ll make sure that
they’re you know very original you know
excuse me if they something seems like
it was taken from another youtuber or
another video but you know great minds
think alike I’m not one of them but I
think you know you got a try so that’s
pretty much it guys and gals thanks for
supporting me I’m looking forward to
doing more builds in the future I’m
gonna try and do this as long as I can
you know because I’m getting older and
get to that point where it’s like
like I started making lots of money here
you know YouTube just cuz you have a
YouTube channel doesn’t mean you’re like
set and I’m obviously putting a lot of
money back into these builds so it’s
kind of like I’m hovering you know and I
really want to blast off and do a lot of
good and I think having the right tools
like I said is it’s very important for
me to start prototyping and testing out
products things like that you know
getting real defined on what the
prototype is because then I can start
patenting and then I can start you know
manufacturing and doing what I need to
do to expand so that I can do this stuff
forever yeah well I love building things
I love being being an inventor you know
I kind of just teach myself everything
so you know I’m a very limited so if you
have a set of skills you can help me
with scalable vector graphics if you can
help me with drawings anything I really
appreciate it I’m thinking about
starting the patreon I don’t want to
like I don’t like asking people for
money but like you know what if we all
work together to pitch in to build
something really amazing that way I
could like hire someone to 3d print out
of metal or titanium or I could actually
you know patent my ideas because every
time I put something on YouTube I’m
actually giving away my rights to it and
no longer is available for me to like
patent it because it’s already common
knowledge I’ve been learning this stuff
it’s kind of discouraging but there’s
still things you can do to get around it
but that’s kind of an Elsa my mentality
if I want to be an inventor that creates
things but if I put it on YouTube and it
kind of like spoils it then it’s like
you know I have to pick and choose what
I show you guys and that’s a problem so
sorry for like venting to you guys it’s
good to get things out there so you guys
can understand where I’m coming from I
don’t want you guys to ever think that
I’m lazy or I’m not trying I can
definitely do my best and in the end I
just want to entertain you guys and I
want you to enjoy my channel and I want
to have a better relationship with my
subscribers because I’ve been very like
cryptic I told myself at 500-thousand
that I probably showed my face it might
be sooner than that and depending but I
think that’s plausible for the year 2016
I’m really gonna try and crack down on
making some really cool stuff and doing
some collaborations with different
popular youtubers and stuff like that
let me try and have fun with it so thank
you for your support and you know if
you’re not if you’re just tuning in to
my videos like feel free to subscribe
and you know let your friends know about
what I’m doing so anyway I have talked
your ear off enough thanks you for
everything and as always take it easy
thanks for watching
workstation
just kidding it’s actually an air hockey
table with the x-carve on top of it this
was sent to me by a company called
inventables they’re pretty cool if you
want to check them out I’ll leave like
links in the description but you guys
probably don’t really care but this
thing’s been a godsend because I’ve been
able to cut out multiple parts of my
build for my prototype I’m entering the
Boca bearings innovation contest it’s
really last-minute ends at the end of
the month but it’s voting based so at
the end of each month they pick a winner
whoever has the most votes wins so I
figure if I can have my subscribers help
me out that I can win second or third
place then I can get a 3d printing
machine that will be crazy because I’d
be able to build so much more stuff so
much more efficiently and make it clean
I won’t have to worry about finding the
right product I mean in the past what
I’ve had to do is find something and
then take it apart and add pieces to it
to make it work so let’s say I wanted to
make this thing shoots fireballs that
would be awesome
but I’d have to work around the plastic
that already exists here now if I could
3d print this thing from scratch I could
hold have this thing completely hollow I
wouldn’t have to do any like machining
and I could probably make like a couple
of these and then give them to people or
have little kits so if you want to
create your own fireball launcher or
something you know it’s much more
plausible because a lot of people don’t
have the tools that I could start
selling kits in a long run I really want
to create a company that helps people
and creates like you know for military
or for like you know civilian use to
protect themselves like I think this is
a really good idea the electric glove
and maybe combining it with this because
you have that same trigger with the like
wrist action so if you guys haven’t seen
that there’s this video definitely check
it out it’s the Iron Man 3 stun glove
and this is the gavel bowing now this is
another example of how a 3d printer
would really help me
this right here took me a couple hours
because I
had to cut this out by hand using a
dremel tool and then glue it all
together sand all the edges to make sure
that it was all nice and looks you know
professional and then make sure and pray
that it didn’t fall apart whereas if I
had a 3d printer I could just make this
whole entire thing from scratch probably
make the little battery clips right here
and just put them in and then you know
I’d be good to go and I could sell these
battery clips on a website you know
because all this stuff it’s expensive
you know it it’s kind of like I’m it’s
like I’m swimming but I’m like
constantly drowning you know and I’m
like now I get to the point where it’s
like alright I’m good and then something
happens and you know the YouTube videos
don’t release as well as I hoped you
guys would have enjoyed it you know
obviously trying my best and you know
sometimes I just like to explore an
option just for the fun of it so you
know keep that in mind sometimes I do
things because it seems like fun to be
creative you to be creative and try
something new
it’s not always the most effective
option but I think it’s entertaining I
think that’s what YouTube is about you
know having fun and being entertained
but at the same time in the future I
want this YouTube channel to expand into
a company that can help people so I
think having the right tools is the best
way to go so I you know thank God I had
the Inventables x-carve
sent to me so that I can cut these
things out and this saves me so much
time I’m gonna have to cut out like a
whole bunch of these for my invention to
work it’s kind of still not exactly
clear what I’m gonna do yet I don’t know
if I want to just say it on camera I
mean I guess I could it’s gonna be some
sort of shield I’ll say that much like
shields are really cool and I want to
work with them I think they’re fun I
think technology is really moving where
materials can be a lot more dense than
they seem like if you guys ever seen
that a spray that’s red they put it on
like on like Dixie Cups and a sumo
wrestler stood on top of them and it
didn’t break it’s ridiculous what
they’re coming out with with chemical
bonding and like barriers that they’re
able to create whenever they carefully
so that’s kind of what I’ve been doing
recently I’m gonna try and have some
more simple builds because I
get really caught up in a long build and
then having people not and really enjoy
it so it seems like you know people like
some of these like little hacks and
stuff like that like like mic packs and
I have a lot of them that you haven’t
seen before and I’ll make sure that
they’re you know very original you know
excuse me if they something seems like
it was taken from another youtuber or
another video but you know great minds
think alike I’m not one of them but I
think you know you got a try so that’s
pretty much it guys and gals thanks for
supporting me I’m looking forward to
doing more builds in the future I’m
gonna try and do this as long as I can
you know because I’m getting older and
get to that point where it’s like
like I started making lots of money here
you know YouTube just cuz you have a
YouTube channel doesn’t mean you’re like
set and I’m obviously putting a lot of
money back into these builds so it’s
kind of like I’m hovering you know and I
really want to blast off and do a lot of
good and I think having the right tools
like I said is it’s very important for
me to start prototyping and testing out
products things like that you know
getting real defined on what the
prototype is because then I can start
patenting and then I can start you know
manufacturing and doing what I need to
do to expand so that I can do this stuff
forever yeah well I love building things
I love being being an inventor you know
I kind of just teach myself everything
so you know I’m a very limited so if you
have a set of skills you can help me
with scalable vector graphics if you can
help me with drawings anything I really
appreciate it I’m thinking about
starting the patreon I don’t want to
like I don’t like asking people for
money but like you know what if we all
work together to pitch in to build
something really amazing that way I
could like hire someone to 3d print out
of metal or titanium or I could actually
you know patent my ideas because every
time I put something on YouTube I’m
actually giving away my rights to it and
no longer is available for me to like
patent it because it’s already common
knowledge I’ve been learning this stuff
it’s kind of discouraging but there’s
still things you can do to get around it
but that’s kind of an Elsa my mentality
if I want to be an inventor that creates
things but if I put it on YouTube and it
kind of like spoils it then it’s like
you know I have to pick and choose what
I show you guys and that’s a problem so
sorry for like venting to you guys it’s
good to get things out there so you guys
can understand where I’m coming from I
don’t want you guys to ever think that
I’m lazy or I’m not trying I can
definitely do my best and in the end I
just want to entertain you guys and I
want you to enjoy my channel and I want
to have a better relationship with my
subscribers because I’ve been very like
cryptic I told myself at 500-thousand
that I probably showed my face it might
be sooner than that and depending but I
think that’s plausible for the year 2016
I’m really gonna try and crack down on
making some really cool stuff and doing
some collaborations with different
popular youtubers and stuff like that
let me try and have fun with it so thank
you for your support and you know if
you’re not if you’re just tuning in to
my videos like feel free to subscribe
and you know let your friends know about
what I’m doing so anyway I have talked
your ear off enough thanks you for
everything and as always take it easy
thanks for watching
Please follow and like us:
Be First to Comment