Hello everyone! Welcome back, thanks for today looks at The King of Random
Today we look at how to create your own laser show running in perfect sync with the music
It is a simple project that you can perform with readily available items and an afternoon time. all materials
we needed a number 10 look normal balloons, some small mirrors
or one large mirror that can be cut into smaller pieces, double-sided tape and a laser pointer.
Now we have all the materials, we can begin.
First, we must remove the top and bottom of our eyes so that we are left with a metal cylinder. This look is full of rice
So I cut off the lid and pour the contents into a container for later use
Then I cut the bottom off
March 21, 1996. I’m not sure that the packaging date or expiration date
Probably the packing date. I do not think it can be omitted.
It is rice
Now the top and bottom of the can are off, we can stretch a balloon over the top of the can.
First we blow the balloon as far as possible
Now the balloon is stretched, we can adjust the balloon easier on the eyes. We want to cut him
at about one-half of the balloon, not at the widest portion, but just above
Pull the balloon over the can is a lot easier if you have an extra pair of hands available to you
Now the balloon over the look stretched, we use a little tape so the edge does not come off of the can
If your goal was to make a small drum, congratulations! You are done
But we try to make a laser show
So we are not quite there yet. The next step is to put a mirror of 2.5 square centimeters on the balloon
Most of the mirrors are made of glass and is difficult to be cut. But this mirror is made of plastic
to be used in the bathroom. I think as protection, the mirror could fall
Because the mirror is made of plastic, we are trying to cut out a piece
The fact that it breaks gives me an idea
I will try to use a knife to make a cut and try to break it on the line instead of a saw
Even though it worked well
Okay, here we go
Huh, it broke at least
Just not where I thought it would break
Here we go
I’m going to try to clamp and watch it in the vise or helping me get straight to break down
That’s what we want. I now use some sandpaper to make the edges cleaner
Here it is. Our square piece of mirror
Now we’re going to fix it only to the balloon with some double-sided tape
Pressure from the inside thoroughly to make sure it is secure
Now we know that it sticks, no problem
The mirror glued we have a basis for what we use for our laser show
We’re going to lay this look for a speaker and the sound coming from the speaker touch the rubber
causing it to vibrate. The laser pointer will appear on the mirror
Reflecting on the wall. Because the latex vibrates with the music, the pattern will be on the wall as a kind spirograph
pattern moving to the vibrations of the music
First we take a piece of tape to stick the laser pointer button so that it stays on
There are several ways to focus a laser pointer on your mirror, because I already had lying rice
I tipped rice on a plate. So I will use rice to focus my laser pointer on the mirror
We know that the design works, let’s try it with music
Hah, that’s nice
Our laser show works fine
But we want to bring to the next level so there is a fog machine, and we also do some
lamps. Let’s see if this one works
♫ Music ♫
This is fun
♫ Music ♫
Quick update, we have a few upgrades
We have an extra look for another speaker
Instead of one small laser that we had before, we have this intense green laser,
We have this purple laser
and we also have this extremely strong blue-green laser.
[AHH !! MY EYES!! HELP!]
We try all three focus the lasers on the mirrors aimed at the wall, then we turn the music
Oh, I have a few small holes in my bulb burned with my mega powerful laser
Let’s turn the music is going more wrong
♫ Music ♫
Battery is already empty [RIP Blue Laser 2017 – 2017]
Here we go
Now you know how a number 10 can, a balloon and a mirror can turn into a laser show
You can order online surprisingly inexpensive lasers. We have posted a number of links in the description where you can buy lasers
Thank you looked at this project today and we look forward to the next. We’ll see you again
That smells fishy …
Man … That blue laser.
I missed the mirror a little bit, but while I was preparing
to melt it, and immediately a hole in the balloon. I have four small holes
I think that has influenced the sound waves
as there is air through it could, therefore, the mirror stopped vibrate significantly with
YOU! The person who has just watched the video until the end
You’re the reason why we work so hard to make these videos. They are people like you
Thanks a lot you so much to give us. As long as you keep looking, we continue to make more videos
Today we look at how to create your own laser show running in perfect sync with the music
It is a simple project that you can perform with readily available items and an afternoon time. all materials
we needed a number 10 look normal balloons, some small mirrors
or one large mirror that can be cut into smaller pieces, double-sided tape and a laser pointer.
Now we have all the materials, we can begin.
First, we must remove the top and bottom of our eyes so that we are left with a metal cylinder. This look is full of rice
So I cut off the lid and pour the contents into a container for later use
Then I cut the bottom off
March 21, 1996. I’m not sure that the packaging date or expiration date
Probably the packing date. I do not think it can be omitted.
It is rice
Now the top and bottom of the can are off, we can stretch a balloon over the top of the can.
First we blow the balloon as far as possible
Now the balloon is stretched, we can adjust the balloon easier on the eyes. We want to cut him
at about one-half of the balloon, not at the widest portion, but just above
Pull the balloon over the can is a lot easier if you have an extra pair of hands available to you
Now the balloon over the look stretched, we use a little tape so the edge does not come off of the can
If your goal was to make a small drum, congratulations! You are done
But we try to make a laser show
So we are not quite there yet. The next step is to put a mirror of 2.5 square centimeters on the balloon
Most of the mirrors are made of glass and is difficult to be cut. But this mirror is made of plastic
to be used in the bathroom. I think as protection, the mirror could fall
Because the mirror is made of plastic, we are trying to cut out a piece
The fact that it breaks gives me an idea
I will try to use a knife to make a cut and try to break it on the line instead of a saw
Even though it worked well
Okay, here we go
Huh, it broke at least
Just not where I thought it would break
Here we go
I’m going to try to clamp and watch it in the vise or helping me get straight to break down
That’s what we want. I now use some sandpaper to make the edges cleaner
Here it is. Our square piece of mirror
Now we’re going to fix it only to the balloon with some double-sided tape
Pressure from the inside thoroughly to make sure it is secure
Now we know that it sticks, no problem
The mirror glued we have a basis for what we use for our laser show
We’re going to lay this look for a speaker and the sound coming from the speaker touch the rubber
causing it to vibrate. The laser pointer will appear on the mirror
Reflecting on the wall. Because the latex vibrates with the music, the pattern will be on the wall as a kind spirograph
pattern moving to the vibrations of the music
First we take a piece of tape to stick the laser pointer button so that it stays on
There are several ways to focus a laser pointer on your mirror, because I already had lying rice
I tipped rice on a plate. So I will use rice to focus my laser pointer on the mirror
We know that the design works, let’s try it with music
Hah, that’s nice
Our laser show works fine
But we want to bring to the next level so there is a fog machine, and we also do some
lamps. Let’s see if this one works
♫ Music ♫
This is fun
♫ Music ♫
Quick update, we have a few upgrades
We have an extra look for another speaker
Instead of one small laser that we had before, we have this intense green laser,
We have this purple laser
and we also have this extremely strong blue-green laser.
[AHH !! MY EYES!! HELP!]
We try all three focus the lasers on the mirrors aimed at the wall, then we turn the music
Oh, I have a few small holes in my bulb burned with my mega powerful laser
Let’s turn the music is going more wrong
♫ Music ♫
Battery is already empty [RIP Blue Laser 2017 – 2017]
Here we go
Now you know how a number 10 can, a balloon and a mirror can turn into a laser show
You can order online surprisingly inexpensive lasers. We have posted a number of links in the description where you can buy lasers
Thank you looked at this project today and we look forward to the next. We’ll see you again
That smells fishy …
Man … That blue laser.
I missed the mirror a little bit, but while I was preparing
to melt it, and immediately a hole in the balloon. I have four small holes
I think that has influenced the sound waves
as there is air through it could, therefore, the mirror stopped vibrate significantly with
YOU! The person who has just watched the video until the end
You’re the reason why we work so hard to make these videos. They are people like you
Thanks a lot you so much to give us. As long as you keep looking, we continue to make more videos
Please follow and like us: