Press "Enter" to skip to content

A Future of 3D Printing | Jasper Bouwmeester | TEDxZwolle


good morning everyone good Co and
imagine that at the entrance we would
have asked to make a full-body scan make
a 3d scan of your body and then
subsequently make it and perfect care
for you so that you would perfectly sit
right through these presentations would
that be nice yeah
say I’m Jo Sperber Mason I’m a founder
of startup here in solar fiber Nehring
we’re based at the polymer Science Park
maybe you heard heard of that and I’m
actually here to tell you that 3d
printing chairs I don’t think that’s
really a good solution it’s not a good
use of material it doesn’t it’s not
going to help us a lot but I do think
and I’m very enthusiastic about new
technologies and I do think there’s a
lot of potential and using new
technologies to shape the future we just
had a brilliant talk about cars and
mobility and it’s very obvious that
technology is is a great importance for
making the future of mobility work
durability the climate change those kind
of things technology is going to help
that as well and last last one which or
last one is for example a population
increase those are all questions big
questions for the future where I think
technology is going to play a big role
and I think 3d printing is going to be a
little bit in that it’s going to help a
little bit so what I want to do today is
talk about what we are doing in Seoul
what kind of cool things are happening
with 3d printing what is possible where
it helps on climate change and mobility
and and what yeah what we can do with it
so when you talk about 3d printing most
people know these kind of things so
there are very nice little printers it’s
actually a Dutch company that’s doing
very well with these these kind of
printers it can make very nice little
bits and pieces with it so they’re used
a lot in classrooms a lot with with home
and – yes I don’t know has anyone got a
printer at home yeah
that’s probably three four people in the
room here it can do very nice things so
for example this is a thing of student
office printed so it’s very nice robot
hand it’s very cool you can make these
kind of things it’s a nice little skull
and you can you can make it make it a
study object those kind of things are
possible with these kind of printers and
how it works is actually quite simple
there’s a head that melts thermoplastic
material and polymer and puts it at the
right place where you want it and it
goes around and around and builds up the
structure from the from scratch the
beauty is all the materials you want to
use end up in the product but the
drawback of this technology is actually
that you melt material on top of other
material and it’s actually relatively
weak so it’s perfect for making parts
that you want to show to people but it’s
not very great for parts that you
actually want to use in a technical
sense so these parts are not very strong
so industrial II there’s a lot of demand
for real technical applications built on
3d printing and this is actually our
printer we built and this is a real
industrial printer so in comparison on
the Automator I showed before you can
print these kind of objects what we can
do here we can go up to a meter scale so
we can make very big products the other
thing is that the products are made in a
different fashion so you can make a very
very strong product and this really
there’s a lot of attention on 3d
printing so if you look to the aircraft
manufacturers and they are actually
investigating 3d printing since since
years now and what they are doing for
example is they’re printing engine parts
it’s an example that you hear quite
often because the cooling challenge
channels in these engine parts are so
small and so little you can make it in
3d printing and you cannot make it in
any other way so it’s very efficient
it’s very effective to use 3d printing
in that way another example of an
industrial use is a dutch ship builder
who announced a few a few months ago
they’re going to produce complete ship
propellers out of 3d printed material
the beauty of that is that you use all
the material effectively rather than
starting with a big block of material
and and removing material of just for
wasting it so one of the examples we we
have so this is something we produce
here as well this is a 3d printed photo
thesis so what it is people that can’t
actually control their ankle currently
get these kind of things and they are
currently already made out of fiber
reinforced materials but we have
developed a method using that printer
where we can produce these kind of
products and they are fit for for every
customer so the patient gets the right
product and beauty is that the time to
get to the product is a lot shorter than
in traditional methods
so therefore the patient is a lot better
off he has or he or she has a product
that’s much better suited and there’s no
there’s not a lot of hassle in getting
towards the product but don’t get me
wrong yes there’s a lot still to develop
in the in the 3d printing world because
currently all traditional methods they
are so well established that everything
is standardized everything is fully
specified it’s very difficult to do to
achieve the same level with 3d printing
so there’s still a lot of research to be
done but I think these examples show
that material properties wise we are
able to match the current materials and
then the second thing I want to talk
about is production volumes so if you
look at current production methods a
typical example that you could compare
to its injection molding or spite
written in in Dutch injection molding is
a production method which is used very
extensively in industry so a lot of the
products you use in your daily life are
made in injection molding and it’s
actually a very simple process to
understand so what happens this is an
injection molding see
machine on the right hand side the
material is melted and it’s pressurized
on the left hand side there is still
malt in this case and the mold cavity is
filled with a liquid polymer because the
mold is a lot cooler the polymer
solidifies again the mold opens and the
product is finished and then the mall
closes again and you get the next cycle
this is a very productive process you
can make very very large amounts of
products with this process but the thing
is that the molds are ridiculously
expensive there’s some very nice cars
outside probably these molds they cost
pretty much the same as as one of those
cars so you can imagine that if you want
to make a small number of products
that’s actually quite unfavorable using
this kind of technique but there’s a lot
of instances where you want to use
smaller series of products if you think
for example if you want to launch a new
product but you’re not yet sure if it’s
going to fly or not same internet that
really likes 3d printing started a year
ago with these kind of things but now if
you know them if you have kids you
probably know them the fidgets spinners
last 2-3 months they’re really hyping
here in the Netherlands he found them a
year ago on the internet on singie first
he printed one of them he was playing
around with it and so in that sense you
you could try maybe making 100 make 200
of those pitches penis give them out see
if people liked them and then you can
start real production and then you can
be really at the front of the hype cycle
with these kind of things secondly
customization is an area where you would
require smaller numbers so if you have a
complete production cycle you need to
sell the same product to everybody you
can maybe change the color but that’s it
so you need to change you need to sell
the same product to you to you to you to
you and currently people don’t like it
anymore people want to have their own
product or people are different so they
need a different product and that’s
where
injection-molding falls short as well so
and that’s where 3d printing may step in
in the last last example where short or
smaller production runs our interesting
is if you if you look at localization so
last last five or ten years you see
really the strength of of people trying
to buy local again we have the theft
doll here with with brilliant products
but you can also imagine that shipping
products all over the world is not
necessarily the best option for small
things like widget spinners it’s it’s
fine but if you go to bigger more
complex yet products transportation is
actually a very big waste of energy so
if you have production units closer to
where you want actually want to use the
product that’s that’s going to save a
lot of energy so those those are three
examples where you may want to have
smaller series and that’s where 3d
printing my stepping and one of the
things people always think is that 3d
printing is very good for one or two or
three maybe five parts but that’s it
but that’s not guys anymore there’s a
lot of technologies out there where you
can actually print large number of
products so the technical there’s other
technologies also our technology we can
fill a bath and we can make multiple
products at the same time we can
actually autumn and print eight kilos of
product per hour and we can go up to 25
kilos by the end of this year so imagine
the amount of products you can actually
print in an hour and it goes goes
relatively quick and the good thing is
that we don’t have to wait before a malt
is finished or before the machine is set
up we can start right away when we have
the model finished and the other thing
you see happening is that there’s also a
lot of intermediates occurring so what’s
on the screen here is something I’m very
excited about that’s something we did
last Friday this is actually the same
injection molding machine only not going
to steal more and more this is a 3d 3d
printed mold so this is a mold we
printed the blue thing on the top and we
can produce parts in that as well
and the beauty of that is that we don’t
have to make an expensive steel mold we
can make printed molds which we can make
much quicker which is much much less
expensive and we can use it to make
maybe two three thousand parts and then
then then we can see if the product
really works and then in the end if it
really works we can invest in the steel
mold again this is all done here and
swallow so I think that’s pretty
exciting as well so the materials were
developed in Zwolle the machine is here
developed in Cibola a machine we test it
on it’s available on the polymer Science
Park so I think there’s really cool
things happening in this area so in the
last last thing I want to talk about is
geometry so I think there’s a lot to say
about structural optimization and that’s
something that’s in technical industry
that’s that’s a hot topic at the moment
but you can see it happening in nature
already for millions of years
so if you look at this lamp in fruit
lantern fruit story you can actually see
the very nice and intricate structure
and now it is possible to make those
kind of things with 3d printing as well
and beauty of that is that we can go to
ultimate lightweight structures so if
you look at those cars outside again
they are from made of complete materials
again so they are very lightweight
already but it is also very important to
understand that the every kilo you save
from these cars
you’re not going to transport it anymore
so it saves energy in the long run so
we’re now able to look at nature take
those kind of structures and put it in
cars and make them more effective more
efficient and this is an example where
that’s that’s actually used so you can
see the 3d printed interior and the
exterior we have applied carbon fiber
but that’s done in a traditional way so
this again is this integration of
current technology with 3d printing
technologies to reach really new
potential products and this is this is
something really exciting so this this
is basically what I wanted to show you I
think there’s a lot of interesting
possibilities with 3d printing in
combination with traditional traditional
methods I think also the challenge for
the designer is no longer choosing
between 3d printing or another
technology but it’s much more getting to
a point where the designer has to
combine various production methods and
that’s a very interesting new area in
product design and product manufacturing
I think 3d printing as I showed you can
play a role in reducing material waste
making structures more energy efficient
and yet just using less material and I
think you’re all sitting relatively
comfortable still so I think those tiers
are still still fine as they are cool
thanks for for your attention
[Applause]
Please follow and like us: