hey guys in this video we’re hanging out
with Stuart edge Devin Graham and we’re
gonna be teaching you how to take
ordinary materials go into nunchucks
very key so right now Devin Graham and I
are at the Home Depot we’re picking up
some materials the materials for this or
a super super basic piece of wood a
little bit of chain some electrical tape
and some I bought to Kiev over here
all right start off making your pair of
nunchucks we need sticks that are 9
inches long 9 inches take your doubt
mark them off in 9 inch segments and cut
as many moves you can we actually got
five different nine-inch sticks out of
this that means it will make two and a
half pair of nunchucks if you’re doing
this all you are safety eye protection
he’s on the waiver right never sign a
waiver when you’re working with grant so
come down make sure it lines up just
like that push backwards I hold in my
wrap guys now if you cut them right they
should be pretty much level
these ones are level these ones are
level that’s our two-part nunchucks
right there one for Stuart one for Devin
you don’t have to worry too much if you
got Nicks and dents in the rod because
we’re to cover up with electrical cable
put your electrical tape with a little
bit of an angle just so that as you turn
the dowel it overlaps the piece before
it you want to get maybe like a eighth
two quarter inch overlap like that so
now if you get somebody spin your dowel
you can essentially just hold your roll
of tape and it will feed itself but we
want to make grant proud so we are going
to do our best the key here is just to
keep the spacing about as even as you
can you can see I’m overlapping about
half the tape you can feel probably a
little bit more it further I push away
the more Stuart turns that’s a good
audience if you don’t have a friend to
help you if you use an extra dough you
can actually make it easier wrap around
oh so low then once you get to the end
here we’re just going to shout out and
do a couple of loops to do this three on
the tip to cover that piece of wood and
then we’re going to go back the other
direction so angle it back down the
opposite way down the entire length of
that rod
and then just to keep it clean grab a
pair of scissors and some dog and now if
you look really close you can see they
overlap each other problem is the ends
are still white and that’s where our
sharpie feels sore the magic happens
right now
[Music]
ooh a casualty alright so we got our
sticks wrapped up and painted black the
next step now is to attach the eye bolt
and cut up the chain so this is the
chain that we’re looking for this is
handy link chain it’s not too thick and
it’s got the nice long strands here that
tell stuff now Devin and I got a
two-foot lengths of chain we actually
need four links per min Chuck so we’re
just going to use a hacksaw and cut off
the fifth link to leave these four
intact so there we go got our link of
four we got our four links of chain and
we need to connect them to these eye
bolts but the problem is they just don’t
go together very well and not so much
wait a minute are you getting that the
eye bolts have a little bit of a gap in
them but it’s not nearly big enough to
get the chain into we’re going to grab
opposite sides and just twist in
opposite directions and it’s going to
open up just enough of a gap we can fit
our length of chain into it and if we
bite it with the pliers like this we can
close that gap and just make it a little
bit more solid a little bit more
permanent and boo-yeah one of our
connections is made now we just need to
do that to the other side same thing
these eye bolts are number to 10 eye
bolts and for them I’m using a 3/32 inch
bit we’re just going to use this to
drill a pilot hole so to make it easier
to screw this in without splitting the
wood you want to have it a little bit
deeper than a little bit deeper
you’re from the math yourself try to get
as close to the center as you can just
doesn’t have to be perfection just has
to be close we’ve got our handle made
we’ve got our hole drill we’ve got our
chain and the screws connected now just
put the two together and begin to twist
you might need a pair of pliers to help
you out because it’s going to start
hurting your fingers if you just keep
twisting it’ll get to the point where
the head of that bolt
rests into the wood and now that’s in
there nice and solid if you want to go
one step further you could put a little
wood glue into the hole and then that
will just help the threads the screw
bite in a little bit
and just like that I’m going to do is
born there’s one side done let’s do the
other make sure your nunchuck handles
are the same size with that final
tweaking your set of nunchucks are done
some people call these numbnuts but
they’re nunchucks I haven’t seen enough
shots now black handle by itself looks
pretty cool but if you add a splash of
color to the tops and the bottoms you
can really dress it up now just for fun
we pick up four different roles of
colored electrical tape so Devon is over
here rocking a blue nunchuck this is
actually pretty sweet so heated blue
wraps on the outside with black
underneath and Stuart did red on the
inside with black on the outside so you
can see you can customize these just
about any way yeah so the electrical
tape also doubles is wow that’s really
Clayton this cannot be good
right now it’s time to teach you how to
use these things going to one side and
back the other way and just back and
forth like this and if you want to get
really fat see you can start throwing it
over our shoulder like this and grab it
with your hand behind the shoulder so so
one two three four and then back and
grab it now if you want to go one step
further you can whip it around and catch
it with the other hand and just people
shooting that process for it and then
you can just use the combination of all
those things there
[Music]
it’s all the rest guy at all the wrist
it’s on the hips to hahaha
hey you’re kidding
so here’s the thing you gotta remember
guys these are weapons they’re not toys
and they may be illegal so you want to
check your local laws if you make these
they’re for decoration only and they got
to stay inside your house you can’t take
it outside
it could be considered concealed weapons
so be careful now if you’d like to make
these at home but you’re a little bit
nervous about chunks of wood flying
around there is another option that’s
very simple let me show you how they
work
here’s what you’re going to do you’re
going to get yourself a piece of pipe
insulation foam these cost about a
dollar 50 from the Home Depot it’s nice
and soft and squishy and then a
three-quarter inch dowel will fit nicely
right into the center
if you reinforce those with a little
electrical tape you can turn your
nunchucks into fun chucks oh there’s
some pieces of wood oh okay who do you
think would win in a bow to fit up I’m
not talking just straight out fine we’re
talking battle to the death leave in the
comments below
so there you have a guys that’s how to
turn common materials from the hardware
store and a really cool set of nunchucks
you customize yourself huge thanks to
Democrat and the Stuart edge for their
brilliant ideas bringing this new fresh
designs to the table they have big
YouTube channels if you’re not prepare
with these guys go check out the links
in the description and give us a
subscription love and go make yourself a
pair of nunchucks but have fun be safe
we’ll see in the next video
doc you there
grab the best so I’m going to actually
put this in my office
Oh
[Music]
with Stuart edge Devin Graham and we’re
gonna be teaching you how to take
ordinary materials go into nunchucks
very key so right now Devin Graham and I
are at the Home Depot we’re picking up
some materials the materials for this or
a super super basic piece of wood a
little bit of chain some electrical tape
and some I bought to Kiev over here
all right start off making your pair of
nunchucks we need sticks that are 9
inches long 9 inches take your doubt
mark them off in 9 inch segments and cut
as many moves you can we actually got
five different nine-inch sticks out of
this that means it will make two and a
half pair of nunchucks if you’re doing
this all you are safety eye protection
he’s on the waiver right never sign a
waiver when you’re working with grant so
come down make sure it lines up just
like that push backwards I hold in my
wrap guys now if you cut them right they
should be pretty much level
these ones are level these ones are
level that’s our two-part nunchucks
right there one for Stuart one for Devin
you don’t have to worry too much if you
got Nicks and dents in the rod because
we’re to cover up with electrical cable
put your electrical tape with a little
bit of an angle just so that as you turn
the dowel it overlaps the piece before
it you want to get maybe like a eighth
two quarter inch overlap like that so
now if you get somebody spin your dowel
you can essentially just hold your roll
of tape and it will feed itself but we
want to make grant proud so we are going
to do our best the key here is just to
keep the spacing about as even as you
can you can see I’m overlapping about
half the tape you can feel probably a
little bit more it further I push away
the more Stuart turns that’s a good
audience if you don’t have a friend to
help you if you use an extra dough you
can actually make it easier wrap around
oh so low then once you get to the end
here we’re just going to shout out and
do a couple of loops to do this three on
the tip to cover that piece of wood and
then we’re going to go back the other
direction so angle it back down the
opposite way down the entire length of
that rod
and then just to keep it clean grab a
pair of scissors and some dog and now if
you look really close you can see they
overlap each other problem is the ends
are still white and that’s where our
sharpie feels sore the magic happens
right now
[Music]
ooh a casualty alright so we got our
sticks wrapped up and painted black the
next step now is to attach the eye bolt
and cut up the chain so this is the
chain that we’re looking for this is
handy link chain it’s not too thick and
it’s got the nice long strands here that
tell stuff now Devin and I got a
two-foot lengths of chain we actually
need four links per min Chuck so we’re
just going to use a hacksaw and cut off
the fifth link to leave these four
intact so there we go got our link of
four we got our four links of chain and
we need to connect them to these eye
bolts but the problem is they just don’t
go together very well and not so much
wait a minute are you getting that the
eye bolts have a little bit of a gap in
them but it’s not nearly big enough to
get the chain into we’re going to grab
opposite sides and just twist in
opposite directions and it’s going to
open up just enough of a gap we can fit
our length of chain into it and if we
bite it with the pliers like this we can
close that gap and just make it a little
bit more solid a little bit more
permanent and boo-yeah one of our
connections is made now we just need to
do that to the other side same thing
these eye bolts are number to 10 eye
bolts and for them I’m using a 3/32 inch
bit we’re just going to use this to
drill a pilot hole so to make it easier
to screw this in without splitting the
wood you want to have it a little bit
deeper than a little bit deeper
you’re from the math yourself try to get
as close to the center as you can just
doesn’t have to be perfection just has
to be close we’ve got our handle made
we’ve got our hole drill we’ve got our
chain and the screws connected now just
put the two together and begin to twist
you might need a pair of pliers to help
you out because it’s going to start
hurting your fingers if you just keep
twisting it’ll get to the point where
the head of that bolt
rests into the wood and now that’s in
there nice and solid if you want to go
one step further you could put a little
wood glue into the hole and then that
will just help the threads the screw
bite in a little bit
and just like that I’m going to do is
born there’s one side done let’s do the
other make sure your nunchuck handles
are the same size with that final
tweaking your set of nunchucks are done
some people call these numbnuts but
they’re nunchucks I haven’t seen enough
shots now black handle by itself looks
pretty cool but if you add a splash of
color to the tops and the bottoms you
can really dress it up now just for fun
we pick up four different roles of
colored electrical tape so Devon is over
here rocking a blue nunchuck this is
actually pretty sweet so heated blue
wraps on the outside with black
underneath and Stuart did red on the
inside with black on the outside so you
can see you can customize these just
about any way yeah so the electrical
tape also doubles is wow that’s really
Clayton this cannot be good
right now it’s time to teach you how to
use these things going to one side and
back the other way and just back and
forth like this and if you want to get
really fat see you can start throwing it
over our shoulder like this and grab it
with your hand behind the shoulder so so
one two three four and then back and
grab it now if you want to go one step
further you can whip it around and catch
it with the other hand and just people
shooting that process for it and then
you can just use the combination of all
those things there
[Music]
it’s all the rest guy at all the wrist
it’s on the hips to hahaha
hey you’re kidding
so here’s the thing you gotta remember
guys these are weapons they’re not toys
and they may be illegal so you want to
check your local laws if you make these
they’re for decoration only and they got
to stay inside your house you can’t take
it outside
it could be considered concealed weapons
so be careful now if you’d like to make
these at home but you’re a little bit
nervous about chunks of wood flying
around there is another option that’s
very simple let me show you how they
work
here’s what you’re going to do you’re
going to get yourself a piece of pipe
insulation foam these cost about a
dollar 50 from the Home Depot it’s nice
and soft and squishy and then a
three-quarter inch dowel will fit nicely
right into the center
if you reinforce those with a little
electrical tape you can turn your
nunchucks into fun chucks oh there’s
some pieces of wood oh okay who do you
think would win in a bow to fit up I’m
not talking just straight out fine we’re
talking battle to the death leave in the
comments below
so there you have a guys that’s how to
turn common materials from the hardware
store and a really cool set of nunchucks
you customize yourself huge thanks to
Democrat and the Stuart edge for their
brilliant ideas bringing this new fresh
designs to the table they have big
YouTube channels if you’re not prepare
with these guys go check out the links
in the description and give us a
subscription love and go make yourself a
pair of nunchucks but have fun be safe
we’ll see in the next video
doc you there
grab the best so I’m going to actually
put this in my office
Oh
[Music]
Please follow and like us: