hey guys in today’s video we’re trying
out an idea suggested to us by Todd
Crowell who wants to know if we can make
a ninja ball full of boobs here’s the
basic plan we already know how to make a
ninja ball using flour as filling but
we’re going to try mixing up a batch of
our o’s and seeing if we can fill the
balloons with that instead will we get
the same type of ninja ball will it have
the same squishing properties or will we
find something else
first off let’s run through a refresher
course on how to make the standard
flower filled ninja balls we’ve got a
bottle with a fairly wide neck at the
top and then a regular water bottle that
I’ve cut in half let’s use a measuring
cup and add 3/4 of a cup of flour into
our bottle now by tapping our funnel
bottle all of the flour will drain down
into the wide next bottle with our 3/4
of a cup of flour in our wide neck
bottle we now need to blow up a balloon
just a little bit it doesn’t need to be
very cool that’ll work once we’ve blown
it up we want to twist it about four
times to really make sure that the neck
is pinched off and no air can escape
after twisting we want to stretch the
neck of the balloon over the neck of the
bottle at which point we can let it
untwist so we’ve just got equal pressure
inside the balloon in the bottle once
we’re at that step we can hold the neck
in place flip the bottle upside down and
start squeezing the flower down into the
balloon let’s pinch off the neck of the
balloon and remove it from the bottle
and then slowly begin to let out the
extra air at this point all the flower
is light and fluffy and full of air so
if we’re not careful some of that flower
could just start shooting up out of the
neck of the balloon like this we don’t
really want that to happen we want our
flower to stay in the balloon so once
all the extra air is gone pinch the
balloon off and then start squeezing the
flower around inside the balloon this
will help remove any excess air and we
can then let that escape out of the top
once we have all the extra air squeezed
out of our balloon we need to cut the
neck off we’ll probably have a little
bit of flour spill when that happens but
that’s not a problem now say we’ve got
our flour filling up our balloon we now
need to seal that in there so it doesn’t
leak everywhere grab another balloon of
the same color and cut the neck off of
it as well we now need to take this
second balloon stretch the neck of it
open and wrap it
all the way around the flower filled
balloon the flower is now sealed inside
and can’t escape but just to give it a
little bit of extra strength and
durability let’s take one more balloon
and wrap that around as well we now have
a nice squishy ball that does this kind
of weird thing where it almost holds its
shape into what you squish it into these
are great as stress balls or if you’re
learning to juggle they work well for
that there’s a final decorative element
we can add which is why we call them
ninja balls it’s sort of a ninja mask
for the stress ball let’s take one more
balloon of a different color cut the
neck off and then cut some more holes in
it that will allow us to stretch it over
and give us a cool mask effect one hole
cut in the top one in the bottom one on
each side and then we can fold it in
half and add a final cut we now have a
balloon that’s been sort of turned into
a rubber ninja mask we can stretch that
over our ball and we’ve now given our
little stress ball something of a ninja
that is how you make the regular ninja
balls using flour and now we want to see
if we can do the same thing but using
slime rather than flour will it give us
a similar texture will it still hold its
shape when you squish him down what’s
gonna be the same and what is going to
be different first let’s mix up some
ooze we’ve got one cup of water now we
need to add 1/2 teaspoon of borax next
we need 1/2 a cup of water and 5 ounces
of clear glue now this is is probably
gonna end up inside of a balloon so
whether or not it has color might not
make a difference but it’s a lot more
fun so we’re gonna add some color also
adding the color helps you see when the
glue and the water are mixed together so
that’s another plus that looks pretty
well mixed so now we need to combine our
two we’ve got our borax solution and our
glue solution these of course start
mixing forming our is very quickly gets
to a point where it really just makes
more sense to use your hands than a
spoon
[Music]
now we need to figure out a way to get
this slime inside of a balloon and I
think we’re gonna try mostly the same
techniques although I think we can
probably cut out the water bottle funnel
and just sort of force the slime down
into the wide mouth bottle all right I’m
just gonna see I can start pulling off
pieces of our slime and letting them
turn into sort of long stringy bits and
fitting them down inside the bottle
whoo one big old bottle full of booze
that’s pretty cool
now we need to try and squeeze that into
a balloon same method as before we’ll
blow it up twist it off fit it over the
neck of the bottle now we just have to
hope that we can get our is out of the
bottle down into the balloon well it’s
in the neck of the balloon there’s a
little bit of ooze just sort of stuck
there and it’s sort of dangling down
into the main body of the balloon all
right so my thought is that maybe we can
fit more of the neck of the balloon over
the bottle so it’s just going directly
into the wide part of the balloon there
we go you can see the neck of the model
is now entirely inside the balloon
hopefully that’ll let us squeeze our use
more to where we want it get in there
who’s that’s a funny voice okay that
right there looks like about the right
amount I think we’re gonna try this
pretty similar in size the ooze doesn’t
try and squeeze itself out the top like
the flower does now it’s trying to
escape stay in theirs I need to get a
another balloon on there before it all
escapes I have to keep my finger on it
until I get that other balloon on
otherwise it just decides I’m leaving
and RuPt out I can tell you one thing
for sure this is definitely more
troublesome with ease than it is with
flower isn’t actively trying to escape
all the time
whoo I think I got it that was tricky
one more layer just for safety which
should be a lot easier since I no longer
have to hold it in with one finger while
I’m trying to do everything else with
the rest of my hands there we go nice
and contained now let’s just give it a
ninja mask preliminary results we now
have a ninja ball that is full of booze
it’s blue which might not make a
difference inside the blue balloons and
we can compare that to our ninja ball
full flower which is standard they feel
about the same they weigh about the same
but even when I’m just lightly holding
them I can feel that there’s a
difference the one made of flour feels
solid until you really squish it at
which point it has an interesting give
and kind of holds its shape after you’re
squished it the ninja ball full of booze
has more give initially and then when
you squeeze it it bounces back into
shape a lot more it doesn’t stay
flattened but the way you can do with
flour see that the flour ninja ball
really flattens out and the ooze ninja
ball just kind of bounces back
speaking of bouncing that’s another
pretty clear difference the ball bounces
whereas the flour ball just sort of
stopped dead maybe has a tiny little
bounce the booth ball is just it’s
bouncy I’m gonna make another one
good size yeah a little bit smaller than
the last time it’s actually a little bit
smaller than our standard ones too but I
don’t see what the difference is between
an over-packer ball and the less packin
image of all and this one is still
trying to squish it out I was hoping
that by having less it would just stop
trying to escape but that’s not the case
it’s still trying to escape get back in
there stay there so I still have to use
one finger to hold it closed I’ll use
the rest of my hands
there we go two different sizes of a
ninja ball pulled the Hoos and I’d say
they react about the same they feel
about the same squishiness they really
have the more classic stress ball feel
when you use the flower and use the O’s
you get it’s it’s still a good squishy
ball there’s certainly nothing bad about
that for squishing stuff still works for
juggling here’s how much I can get it to
bounce so I’m gonna try and throw it
really hard got about six feet of bounce
let’s try the other one well that
deformed it a little bit we forced it
out of some of its layers squished so
hard that some of the layers of the
balloon started pulling away in spots or
it might have actually just started
ripping what hey you did it started
ripping that away I just want to step on
it Bella pops
took quite a bit of effort I thought it
was gonna be a little more fragile than
that but I basically had to jump on this
to get it to pop open so I think if
you’re just playing around with it
unless you’re on really rough or
Scratchy your spikey services they’ll
probably be pretty durable
Todd Crowell thank you for your idea to
try using our ninja use in our ninja
balls you check your youtube inbox we’re
sending you 25 bucks and remember if
you’ve got a cool idea and we use it to
make a video we’ll send you $25 so let
us know your thoughts down in the
comments guys that’s not all we’ve got
more for you to see if you click the box
up at the top that will transport you
directly to our last video the box at
the bottom will show you what YouTube
thinks you should be watching next and
this bomb here in the middle will
subscribe you to our channel so you
never miss a video don’t forget to ring
that Bell and we’ll see you the next one talk to you then
out an idea suggested to us by Todd
Crowell who wants to know if we can make
a ninja ball full of boobs here’s the
basic plan we already know how to make a
ninja ball using flour as filling but
we’re going to try mixing up a batch of
our o’s and seeing if we can fill the
balloons with that instead will we get
the same type of ninja ball will it have
the same squishing properties or will we
find something else
first off let’s run through a refresher
course on how to make the standard
flower filled ninja balls we’ve got a
bottle with a fairly wide neck at the
top and then a regular water bottle that
I’ve cut in half let’s use a measuring
cup and add 3/4 of a cup of flour into
our bottle now by tapping our funnel
bottle all of the flour will drain down
into the wide next bottle with our 3/4
of a cup of flour in our wide neck
bottle we now need to blow up a balloon
just a little bit it doesn’t need to be
very cool that’ll work once we’ve blown
it up we want to twist it about four
times to really make sure that the neck
is pinched off and no air can escape
after twisting we want to stretch the
neck of the balloon over the neck of the
bottle at which point we can let it
untwist so we’ve just got equal pressure
inside the balloon in the bottle once
we’re at that step we can hold the neck
in place flip the bottle upside down and
start squeezing the flower down into the
balloon let’s pinch off the neck of the
balloon and remove it from the bottle
and then slowly begin to let out the
extra air at this point all the flower
is light and fluffy and full of air so
if we’re not careful some of that flower
could just start shooting up out of the
neck of the balloon like this we don’t
really want that to happen we want our
flower to stay in the balloon so once
all the extra air is gone pinch the
balloon off and then start squeezing the
flower around inside the balloon this
will help remove any excess air and we
can then let that escape out of the top
once we have all the extra air squeezed
out of our balloon we need to cut the
neck off we’ll probably have a little
bit of flour spill when that happens but
that’s not a problem now say we’ve got
our flour filling up our balloon we now
need to seal that in there so it doesn’t
leak everywhere grab another balloon of
the same color and cut the neck off of
it as well we now need to take this
second balloon stretch the neck of it
open and wrap it
all the way around the flower filled
balloon the flower is now sealed inside
and can’t escape but just to give it a
little bit of extra strength and
durability let’s take one more balloon
and wrap that around as well we now have
a nice squishy ball that does this kind
of weird thing where it almost holds its
shape into what you squish it into these
are great as stress balls or if you’re
learning to juggle they work well for
that there’s a final decorative element
we can add which is why we call them
ninja balls it’s sort of a ninja mask
for the stress ball let’s take one more
balloon of a different color cut the
neck off and then cut some more holes in
it that will allow us to stretch it over
and give us a cool mask effect one hole
cut in the top one in the bottom one on
each side and then we can fold it in
half and add a final cut we now have a
balloon that’s been sort of turned into
a rubber ninja mask we can stretch that
over our ball and we’ve now given our
little stress ball something of a ninja
that is how you make the regular ninja
balls using flour and now we want to see
if we can do the same thing but using
slime rather than flour will it give us
a similar texture will it still hold its
shape when you squish him down what’s
gonna be the same and what is going to
be different first let’s mix up some
ooze we’ve got one cup of water now we
need to add 1/2 teaspoon of borax next
we need 1/2 a cup of water and 5 ounces
of clear glue now this is is probably
gonna end up inside of a balloon so
whether or not it has color might not
make a difference but it’s a lot more
fun so we’re gonna add some color also
adding the color helps you see when the
glue and the water are mixed together so
that’s another plus that looks pretty
well mixed so now we need to combine our
two we’ve got our borax solution and our
glue solution these of course start
mixing forming our is very quickly gets
to a point where it really just makes
more sense to use your hands than a
spoon
[Music]
now we need to figure out a way to get
this slime inside of a balloon and I
think we’re gonna try mostly the same
techniques although I think we can
probably cut out the water bottle funnel
and just sort of force the slime down
into the wide mouth bottle all right I’m
just gonna see I can start pulling off
pieces of our slime and letting them
turn into sort of long stringy bits and
fitting them down inside the bottle
whoo one big old bottle full of booze
that’s pretty cool
now we need to try and squeeze that into
a balloon same method as before we’ll
blow it up twist it off fit it over the
neck of the bottle now we just have to
hope that we can get our is out of the
bottle down into the balloon well it’s
in the neck of the balloon there’s a
little bit of ooze just sort of stuck
there and it’s sort of dangling down
into the main body of the balloon all
right so my thought is that maybe we can
fit more of the neck of the balloon over
the bottle so it’s just going directly
into the wide part of the balloon there
we go you can see the neck of the model
is now entirely inside the balloon
hopefully that’ll let us squeeze our use
more to where we want it get in there
who’s that’s a funny voice okay that
right there looks like about the right
amount I think we’re gonna try this
pretty similar in size the ooze doesn’t
try and squeeze itself out the top like
the flower does now it’s trying to
escape stay in theirs I need to get a
another balloon on there before it all
escapes I have to keep my finger on it
until I get that other balloon on
otherwise it just decides I’m leaving
and RuPt out I can tell you one thing
for sure this is definitely more
troublesome with ease than it is with
flower isn’t actively trying to escape
all the time
whoo I think I got it that was tricky
one more layer just for safety which
should be a lot easier since I no longer
have to hold it in with one finger while
I’m trying to do everything else with
the rest of my hands there we go nice
and contained now let’s just give it a
ninja mask preliminary results we now
have a ninja ball that is full of booze
it’s blue which might not make a
difference inside the blue balloons and
we can compare that to our ninja ball
full flower which is standard they feel
about the same they weigh about the same
but even when I’m just lightly holding
them I can feel that there’s a
difference the one made of flour feels
solid until you really squish it at
which point it has an interesting give
and kind of holds its shape after you’re
squished it the ninja ball full of booze
has more give initially and then when
you squeeze it it bounces back into
shape a lot more it doesn’t stay
flattened but the way you can do with
flour see that the flour ninja ball
really flattens out and the ooze ninja
ball just kind of bounces back
speaking of bouncing that’s another
pretty clear difference the ball bounces
whereas the flour ball just sort of
stopped dead maybe has a tiny little
bounce the booth ball is just it’s
bouncy I’m gonna make another one
good size yeah a little bit smaller than
the last time it’s actually a little bit
smaller than our standard ones too but I
don’t see what the difference is between
an over-packer ball and the less packin
image of all and this one is still
trying to squish it out I was hoping
that by having less it would just stop
trying to escape but that’s not the case
it’s still trying to escape get back in
there stay there so I still have to use
one finger to hold it closed I’ll use
the rest of my hands
there we go two different sizes of a
ninja ball pulled the Hoos and I’d say
they react about the same they feel
about the same squishiness they really
have the more classic stress ball feel
when you use the flower and use the O’s
you get it’s it’s still a good squishy
ball there’s certainly nothing bad about
that for squishing stuff still works for
juggling here’s how much I can get it to
bounce so I’m gonna try and throw it
really hard got about six feet of bounce
let’s try the other one well that
deformed it a little bit we forced it
out of some of its layers squished so
hard that some of the layers of the
balloon started pulling away in spots or
it might have actually just started
ripping what hey you did it started
ripping that away I just want to step on
it Bella pops
took quite a bit of effort I thought it
was gonna be a little more fragile than
that but I basically had to jump on this
to get it to pop open so I think if
you’re just playing around with it
unless you’re on really rough or
Scratchy your spikey services they’ll
probably be pretty durable
Todd Crowell thank you for your idea to
try using our ninja use in our ninja
balls you check your youtube inbox we’re
sending you 25 bucks and remember if
you’ve got a cool idea and we use it to
make a video we’ll send you $25 so let
us know your thoughts down in the
comments guys that’s not all we’ve got
more for you to see if you click the box
up at the top that will transport you
directly to our last video the box at
the bottom will show you what YouTube
thinks you should be watching next and
this bomb here in the middle will
subscribe you to our channel so you
never miss a video don’t forget to ring
that Bell and we’ll see you the next one talk to you then
Please follow and like us: