Press "Enter" to skip to content

Casting Metal in Kinetic Sand (Oddly Satisfying?)


we’ve got a really fun experiment today
brought to us by youtube user daniel
burton who wants to know if we can use
we’ve done a few different experiments
in the past using sands to try and cast
metal and so I think this is an
interesting progression kinetic sand is
this weird polymer covered sand that
does a pretty good job of sticking to
itself just a little bit so the sand
really bonds and it doesn’t pour like
individual grains of sand it almost
pours more like a sort of a liquid like
a clumpy liquid it’s weird there’s a
good chance that one of the reasons
Daniel wanted to see us try casting
molten metal in this is that it does a
good job of taking mould shapes in fact
this sand comes with a few different
molds let’s look at what happens when we
pack the sand into those boom the grains
of sand that make this stuff up are
really small so you can pick up some
pretty good details here you can see the
inlaid brick texture that’s a part of
this cast similarly let’s try taking
this piece and pressing it down into the
sand once again you can see it picked up
quite a bit of detail here’s the basic
idea we’ve got about four pounds of this
kinetic place and we’re gonna try a
couple different methods for making
molds in the sand and then see if we can
cast melted metal into it first up I
think we’re gonna try some aluminum and
because this sand comes in a plastic
container we’re gonna try transferring
some of it into this frying pan and
there’s a first experiment I want to try
casting a handprint so I’m gonna take
this and throw it down into the pan and
try and press my hand in maybe press all
the sand down around it so it really
does a good job of keeping its shape
then we’ll melt some aluminum see if we
can pour it in okay I think I’ve
probably got a pretty good hand print
going on here
that’s a handprint good detail not like
finger print level of detail but it’s
pretty good detail still I have another
test that when I do I also want to just
do a test for how well the sand takes
molds that we make ourselves so I’ve got
here this little king of random logo
that I just made out
MDF board we’re gonna see if we can get
this to pick up all the details and
really give a good impression down into
that sand for the metal to grab on to
it’s packed not super strong packed I’m
most concerned about the dot inside the
art and the little lines inside the O so
I think I’m just gonna take a little bit
of the sand and try and just drop it
down into those spots so we know that
there’s already sand in them and
hopefully it comes out in the way we
want a little bit of uncompressed sand
hmmm didn’t really stick very well to
the parts in little gaps and spaces so
we have an OK outline but we lost a lot
of detail this time I’m trying to not
compress it quite as much because it
might be that when it gets pushed too
far into the mold it can’t really
release so this is pressed in but a
little more gently that one there turned
out pretty well and it does have some
tiny little cracks in the sands just
from not being compressed too much I
think we’ve got a little bit of a
trade-off where we rather have the sand
with some little cracks in it or would
we rather lose a lot of the detail from
all the nooks and crannies of our mold
we’ve got some aluminum in hey we’ve got
our updated foundry with the fire bricks
as the insulation and at the bottom with
our nicer top it’s time to give us the
real test see what we can do with it and
we’re gonna start by melting some
got a nice crucible full of molten
aluminum inside our foundry we’re gonna
pull that out
set it down I’ll grab the pouring tongs
grab it I’m gonna first going to pour it
into the king of random symbol and then
everything else that’s left over I’m
just going to pour it into the handprint
we’re gonna see how they go
[Music]
whoa
the middle finger ‘less hands it may be
kind of hard to see cuz it is really
bright out here but that might be on
fire yeah there’s definitely flames
coming off of that
it smells interesting probably not too
good to be breathing in much as I soon
so I’m just gonna stop trying to smell
that for now
now this is aluminum which means it
needs to cool off for quite a while
before it stops being liquid see this is
still very runny past the tongues right
through it
this one’s thinner so it was able to
cool down more and it’s not solid yet
it’s sort of almost a a wet sand
consistency I can stab into it if I try
poke it dent it very easily we need to
give those some time to cool off the
comment request was to see if we could
cast molten metal in this kinetic sand
and we’re trying that with aluminum
we’ve got our aluminum that we poured
and those are cooling off outside
because aluminum takes a while to cool
down but in the meantime there’s
something else I wanted to try the
comment did not specify what type of
metal so we’ve got a different type that
we’re gonna try first let’s make them
mold then let’s grab the metal running a
little low on these two sand colors so
I’m just gonna mix them together now for
the mold on this version I have a tiny
plastic replica of grants Head &
Shoulders this was made by 3d scanning
grant while he sat in a rotating chair
and then printing it out on a 3d printer
pretty cool little thing so we can just
have mini grant sitting in the studio
all the time and we’re gonna see if we
can’t make a mold of this and then cast
it in metal what do you say mini grant
you ready to get faceplant into this in
kinetic sand oh no I don’t want to haha
too bad
squish squish squish squish squish
all right moment of truth do we have a
mini-grant imprint in the sand
his hair is sticking up ha think we do
you’ve got grants face smooshed down
into the sand here lovely
obviously this 3d print isn’t the
highest resolution in the world so we’ll
see how much of it gets transferred from
the 3d print into the sand into the
metal you may have noticed that our mini
grant mold in the sand is still in the
plastic container that I was using
before and I didn’t use that because I
didn’t want to melt it with molten
aluminum so this time I’m using gallium
I have here a couple of pounds of
gallium now if you’re unfamiliar with
gallium gallium is a metal with a
melting point of about eighty five point
six degrees Fahrenheit which means that
this metal right here is about as warm
as a bathtub at any rate it’s easily
cool enough to put your hands in it’s
really kind of neat to play with because
it’s pretty dense it is metal after all
and it doesn’t have nearly the danger or
destructive power of mercury even though
it looks pretty much just the same when
it’s melted so here we go let’s see if
we can pour some of our gallium down
into our mold and cast a little mini
grant bad there we go I had a barrier
kind of low on this one spot now as you
can see of course it has spilled over
the edge that’s all right
we’re just gonna let this cool down and
then take it out and see what kind of
result we’ve got
[Music]
our lumen um has partially cooled down
at least enough that I feel safe bring
it inside and setting these pans on a
table at least with a cloth underneath
it so now to cool these down the rest of
the way let’s try taking them out
dropping them into this bowl of water
which should both cool them off and help
rinse off any sand stuck to them it’s a
middle finger and the other fingers are
puddles you know that I mean obviously
other than the missing finger and the
puddle fingers are going around but the
detail that that picked up is actually
not too bad
concede like the creases in my fingers a
little bit definitely got the finger
shape interestingly the heat seems to
burn out the color from the sand there
is still some sand stuck to this but
it’s not purple it’s just kind of sand
colored as I said it definitely dis
colors the sand and I would say just
straight-up burns it and it absolutely
does something to the polymer you can
see if I just poke a little bit of this
and scoop it with the screwdriver here
it sort of sticks together very much
clumped up doesn’t like to separate and
then I can squish it back down too
packed if I do the same thing the sand
here in the middle it’s just very
powdery falls to pieces does not clump
does not seem to pack back together well
at all so it’s completely dried up and
burned up deep I have to dig before I
get back to some purple and sticking the
sand so the color is still under there
it didn’t burn all the way through we’ve
just got maybe I don’t know an eighth of
an inch sort of thing of this just
absolute powder no binding at all
and I wonder if we can get rid of all of
that and still use the sand underneath
it this is actually pretty interesting
too you can kind of see the change as it
radiates out here’s the burned portion
where all the color is gone and then
fairly abruptly the colour returns and
that’s acting like the normal sand it’s
got the springiness the stickiness see
how I can’t random symbol did too shabby
it’s not perfect but it’s decent you can
see what it looks like obviously it
ruins some of the sand but the sand does
do a pretty good job of holding its
shape and then containing the aluminum
even if some of it does get burned up
the aluminum looks alright let’s see how
the gallium did
oh boy that is sticking quite a bit
might be because I had to put it in the
freezer for 40 minutes overall that is
not too shabby of a casting like it
picked up some pretty crazy detail you
can see the print lines in the gallium
it didn’t seem to get a little bit of
the sand stuck and embedded into the
metal in a couple of spots that’s in
there a little bit I’m not sure what
exactly about that particular spot and
these other tiny little spots is
different from the rest of it but
overall I’d say we did get a pretty good
casting and well it’s not exactly a
photorealistic sculpture of grant it
looks about as much like him as this 3d
printed so I’m pretty impressed
well Daniel Burton you wanted us to try
using kinetics and a cast metal and I
would say we got some decent results
with both the aluminum and the gallium
Daniel Burton thank you for your idea
we’re sending you $25 remember if you’ve
got any cool ideas let us know down in
the comments and if we use your idea to
make a video we’re gonna send you 25
bucks king of random fans the fun
doesn’t have to end here that box at the
top will take you directly to our last
video if you haven’t seen it or need to
watch it again go check that out
the box at the bottom will show you what
YouTube thinks you need to check out
next this bomb here in the middle will
subscribe you to the channel that way
you never miss a video don’t forget to
ring that Bell and we’ll see you in the next one talk to you then
Please follow and like us: