
[Music]
twelve years ago I was reading an
article regarding climate change and the
growing concern over carbon emissions in
our atmosphere I noticed in the article
there was a fair bit of attention being
paid to the large industries like power
generation and the automotive industry
but there was nearly no mention of the
heating industry the industry that I
have focused nearly 20 years of my
career on and according to Statistics
Canada roughly 15% of the emissions
generated in this country come from my
industry so I started to look at the
work we’ve done by the large heating
manufacturers of heating appliances to
see what was being done to address this
and as best as I could tell most of the
research and development work that was
being done was directed toward
maximizing efficiencies nothing was
being done to deal with the emissions
directly and the reason for this is
fairly simple it is far easier to deal
with a large single emission point than
multiple emission points so in order for
you to be able to capture more carbon
than you’re producing the infrastructure
needed to make that work has to
obviously follow us in those guidelines
you have to be able to not rob Peter to
save Paul further to this the work that
is being done is not being done well
enough in my opinion and to understand
what I’m referring to all you need to do
is go outside today after you leave here
take a look at the city skyline and
notice all of those plumes of steam that
are rising off of those buildings and
that represents heat that somebody has
bought and paid for
we’re just venting it off into the
atmosphere so I realized that something
more needed to be done so my colleagues
and I have spent 12 years developing our
current technology to reduce these
emissions and to have a positive impact
in climate change our goal is to see if
a solution to reduce these emissions was
possible beyond simple energy management
and energy and sorry efficiency
increases pardon me
now in order to reduce the amount of
wasted heat and carbon dioxide emissions
we needed to find something simple and
cost-effective
now heat exchangers been using them for
thousands of years that’s fairly simple
we had a pretty good understanding how
to deal with the wasted heat but what
about the carbon emissions what simple
reactant could we use to interface with
the carbon emissions that we were
producing and as it turns out a chemical
that we use in the heating industry is
actually quite good at it not only is it
good at it but as its reacting with the
carbon dioxide emissions it actually
creates heat which we need and it
produces a commodity that we use it
produces soda ash and to give you an
example of how much or an idea rather of
how much soda ash we use global
consumption of soda ash is roughly 62
million metric tonnes per year and it’s
used in everything from concrete
manufacturing detergents glass
manufacturing pharmaceuticals it’s like
a Swiss Army knife of chemicals just to
name a few so what about the look of the
device that we’re building surely we
could just take these processes just jam
inside a square box shuffle them out the
door and that’s what the other
manufacturers are doing fairly
uninspired devices
well we couldn’t really do that so many
years ago I had the pleasure of working
on a heating system here in Calgary at a
church downtown and the boiler head quit
working and I had been tasked with going
out to repair it so I walked down into
the basement of this church and I walked
into the mechanical room open up the
door and there was this boiler and it
was amazing absolutely amazing it was
love at first sight I was in love with
this thing that’s weird right I’m ok
with weird I’m ok with that
so this boiler was installed in 1923 it
was originally designed as a coal-fired
boiler and was later converted into
natural gas in the 1940s but what was
most remarkable to me was the attention
to detail in the build of this boiler it
had intricate floral designs and
scrolling on the face of the cast-iron
now the logic by today’s standard is
that amount of detail is a complete
waste I mean you’re putting it on a
boiler you’re putting it into mechanic’s
room you’re closing the door and you’re
forgetting about it why why waste the
amount of resources on that now the
struggles with associated with shifting
an entire industry can be overwhelming
changing the habits and mindset of both
builders and consumers is not an easy
thing to do and bringing attention to
something that we have taken for granted
for so long is not something you can
change within a few discussions now
we’ve been told that this path that
we’ve chosen will not be easy we’ve been
told that said it’d be long and arduous
but we’re still here we’re still working
working towards changing an entire
industry that is already set to change
whether it wants to or not my dream is
that this marriage between form and
function will be able to help the
industry and the consumers alike pay
closer attention to the details of the
equipment that we produce and the
emissions that we’re producing and with
a little bit of luck and a ton of work I
believe we can make a difference and
play a role in reducing our impact on
the environment that’s really short
thank you
[Applause]
twelve years ago I was reading an
article regarding climate change and the
growing concern over carbon emissions in
our atmosphere I noticed in the article
there was a fair bit of attention being
paid to the large industries like power
generation and the automotive industry
but there was nearly no mention of the
heating industry the industry that I
have focused nearly 20 years of my
career on and according to Statistics
Canada roughly 15% of the emissions
generated in this country come from my
industry so I started to look at the
work we’ve done by the large heating
manufacturers of heating appliances to
see what was being done to address this
and as best as I could tell most of the
research and development work that was
being done was directed toward
maximizing efficiencies nothing was
being done to deal with the emissions
directly and the reason for this is
fairly simple it is far easier to deal
with a large single emission point than
multiple emission points so in order for
you to be able to capture more carbon
than you’re producing the infrastructure
needed to make that work has to
obviously follow us in those guidelines
you have to be able to not rob Peter to
save Paul further to this the work that
is being done is not being done well
enough in my opinion and to understand
what I’m referring to all you need to do
is go outside today after you leave here
take a look at the city skyline and
notice all of those plumes of steam that
are rising off of those buildings and
that represents heat that somebody has
bought and paid for
we’re just venting it off into the
atmosphere so I realized that something
more needed to be done so my colleagues
and I have spent 12 years developing our
current technology to reduce these
emissions and to have a positive impact
in climate change our goal is to see if
a solution to reduce these emissions was
possible beyond simple energy management
and energy and sorry efficiency
increases pardon me
now in order to reduce the amount of
wasted heat and carbon dioxide emissions
we needed to find something simple and
cost-effective
now heat exchangers been using them for
thousands of years that’s fairly simple
we had a pretty good understanding how
to deal with the wasted heat but what
about the carbon emissions what simple
reactant could we use to interface with
the carbon emissions that we were
producing and as it turns out a chemical
that we use in the heating industry is
actually quite good at it not only is it
good at it but as its reacting with the
carbon dioxide emissions it actually
creates heat which we need and it
produces a commodity that we use it
produces soda ash and to give you an
example of how much or an idea rather of
how much soda ash we use global
consumption of soda ash is roughly 62
million metric tonnes per year and it’s
used in everything from concrete
manufacturing detergents glass
manufacturing pharmaceuticals it’s like
a Swiss Army knife of chemicals just to
name a few so what about the look of the
device that we’re building surely we
could just take these processes just jam
inside a square box shuffle them out the
door and that’s what the other
manufacturers are doing fairly
uninspired devices
well we couldn’t really do that so many
years ago I had the pleasure of working
on a heating system here in Calgary at a
church downtown and the boiler head quit
working and I had been tasked with going
out to repair it so I walked down into
the basement of this church and I walked
into the mechanical room open up the
door and there was this boiler and it
was amazing absolutely amazing it was
love at first sight I was in love with
this thing that’s weird right I’m ok
with weird I’m ok with that
so this boiler was installed in 1923 it
was originally designed as a coal-fired
boiler and was later converted into
natural gas in the 1940s but what was
most remarkable to me was the attention
to detail in the build of this boiler it
had intricate floral designs and
scrolling on the face of the cast-iron
now the logic by today’s standard is
that amount of detail is a complete
waste I mean you’re putting it on a
boiler you’re putting it into mechanic’s
room you’re closing the door and you’re
forgetting about it why why waste the
amount of resources on that now the
struggles with associated with shifting
an entire industry can be overwhelming
changing the habits and mindset of both
builders and consumers is not an easy
thing to do and bringing attention to
something that we have taken for granted
for so long is not something you can
change within a few discussions now
we’ve been told that this path that
we’ve chosen will not be easy we’ve been
told that said it’d be long and arduous
but we’re still here we’re still working
working towards changing an entire
industry that is already set to change
whether it wants to or not my dream is
that this marriage between form and
function will be able to help the
industry and the consumers alike pay
closer attention to the details of the
equipment that we produce and the
emissions that we’re producing and with
a little bit of luck and a ton of work I
believe we can make a difference and
play a role in reducing our impact on
the environment that’s really short
thank you
[Applause]
Please follow and like us: