
[Music]
[Music]
[Applause]
a few years ago I got into surfing
big-time I move close to this beach and
restructured my little sign writing
company to free up more time for surf
surfing is by far the most immersive
natural experience that I’ve ever had
and it’s given me a whole new
appreciation for nature and for life in
general I started to notice the water at
my local surf break tasted a little bit
funny after a heavy rain I found out
there was an old landfill up the road
that released toxic waste into the
stream which flowed down into the oceans
and amongst us and the marine life that
we shared them with at the time I was
producing laser and vinyl cut signs from
petroleum-based plastics for every logo
we stuck on a car or building we would
send about 6 times that amount of non
biodegradable waste to landfill when we
were busy this probably equated to a ton
every couple of months a truck would
pick it up and take it away out of sight
and out of mind
or so I thought I started to look for
alternatives but there weren’t any so I
started to reconsider my life my career
choices a few weeks later I’d into one
of my surfboards on some rocks it wasn’t
until I went to repair it that I
discovered it was made from polyurethane
foam and polyester resin these materials
are carcinogenic toxic and non
biodegradable which means they last
forever in the landfill and are bad for
the people that work for them but they
work with them and bad for the
environment I also discovered that the
majority of surfboards sold in New
Zealand were either imported as a
finished board or as a blank which is
essentially an oversized surfboard that
the local shapers will cut down to the
finished dimensions and and wrap in
fiberglass and and risen an average
surfboard weighing only three kilograms
will emit 300 kilograms of carbon
dioxide in its lifetime
this completely contradicted what
surfing meant to me so I thought I try
and make my own surfboard from wood
using the laser cutter at work after
doing some research I discovered that
the first surfboards were hollow and
made entirely from timber up until
around the mid 1950s when polystyrene
was invented
this new material was quickly adopted
because it was a lot cheaper lighter and
it was easy to work with
I was curious I guess to see if I could
use the fancy machines that we had at
work to make a traditional-style
Hollywood and surfboard that would
compete on both performance and price
with these new engineer materials I got
really close and then the importer of
this Italian player that I was using ran
out of stock at the time I thought this
was going to be a huge setback but it
was actually the best thing that could
have happened over the next couple of
months I met two Kiwi blokes who showed
me what it truly means to run a
sustainable business and how ignorant
that I was to think it simply meant to
just make things out of wood they showed
me running a sustainable business was
about developing local solutions for
local problems whilst having a holistic
perspective of everything that comes in
and out of their business and how all
these little transactions affect the
people in their local community the
environment and their bottom line my
first task was to find alternative
supplier of timber other board makers
around the world were using Polonia
Polonia is a light strong word that is
rot resistant in salt water which makes
it perfect for surf or construction this
is when I met Graham now Graham runs a
dairy farm in the Waikato that’s right
next to one of the country’s best trout
fishing rivers when he realized the
effects that his dairy farm were having
on the nearby waterways he planted rows
of Polonia trees 60% of rivers in New
Zealand are deemed unsuitable due to
livestock runoff by strategically
combining agriculture and forestry
Graham is able to capture and harvest
his cows waste which is good for the
trout and it’s good for the people that
eat them it’s good for the rivers and
the oceans but it’s also good for grain
because he makes more money now per acre
than he ever did farming just cows the
skeleton-like structure that we
previously devised had strength issues
in the hollow sections so we would fill
these the impact areas with bits of
broken surfboards this worked and it
kept a few boards away from landfill
it was quite time-consuming teaming with
this guy Richard up at the Perot tip
what a legend
so Richard drives around Wellington
picking up polystyrene packaging from
fish restaurants and other retailers he
takes it all the way and he mulches it
all up into small chips which he then
ream olds into the large slabs like this
one here of perfectly good polystyrene
foam essentially he devotes the majority
of Winton’s polystyrene waste away from
landfill and sells it to people like me
to give it a new life this material
makes the core of our boards as you can
see it’s it’s full of imperfections but
we cover them all with grains beautiful
timber this method of board making is
known as sandwich construction and it
involves combining low and high density
materials together with a layer of fiber
in between the result is an extremely
strong and light surfboard that won’t
ding or break which means they last a
lot longer and require a lot less
maintenance in order to make a big part
of my job is to tailor the shape and
size of these surfboards to the shape
size and ability of the surfers but in
order to do this in this type of
construction i had to build some pretty
fancy machines so after the last over
the last 18 months I’ve been working on
a reconfigurable mold inside a vacuum
press this machine interprets the
curvature of the customers unique 3d
model and it replicates it across a
fixable bottom sheet we cut all the
components flat here’s one of the cause
as you can see it hasn’t got any curve
in it and then as we glue the components
together we start to introduce the curve
and the final process is to glue the
timber on which goes on top and once the
glue is dry so that will occurs inside a
vacuum press so the vacuum sucks all the
air out applies an even pressure once
the glue is dry the borders essentially
set to the shape and ready to be to be
shaped and the finished product ends up
looking a little bit like that chuck
some wax on it and she’s ready to go
[Applause]
so so at the moment we shape all our own
boards but what we really want to do is
work with the talented shapers all
around New Zealand so that they can
provide their customers with an
environmentally friendly alternative to
the imported blanks that they’re
currently using producing a surfboard
it’s quite a wasteful process and it’s
almost impossible to not generate waste
in the production of the boards but
that’s not to say the waste can’t either
be repurposed or recycled we save all
our off cuts of polystyrene and put them
in this big bag when it’s full we take
it out to Richard paying $25 and he
recycles it into the future the next
batch of blocks we save all that thin
offcuts of Polonia to make federal like
our business cards and and these gift
vouchers and we’re working with Chris
who’s a local body surfer to make these
beautiful hand hand planes for my larger
offcuts
we also save all our trimmings of
fiberglass to make funds all in an
attempt to better serve the people in
our local community the environment and
our bottom line I recently decided that
we would no longer send these boards
overseas limiting our market to New
Zealand this means reduce fuel
consumption but it also means that we
can easily repair any damage they do
incur to ensure they never end up in
landfill instead we’re going to licence
and sell our technology so the other
board makers all around the world can
make surfboards for the local surfers
from locally recycled or locally grown
materials our projections suggest that
this will be more profitable than
exporting boards anyway we were recently
awarded with a gold level eco board
certification from sustainable surf this
has been really good marketing but more
importantly it’s our way of I guess
reassuring our customers that their
buying decisions are having a positive
impact on the planet and when they pedal
out on one of our boards they know the
materials that went into making it I’m
polluting the water beneath them I’m the
shame to admit that I had to taste the
implications of my actions before I
started to change them but nature’s
warning cut signs can be quite subtle
and it’s often easier to turn a blind
eye thank you
you
you
[Music]
[Applause]
a few years ago I got into surfing
big-time I move close to this beach and
restructured my little sign writing
company to free up more time for surf
surfing is by far the most immersive
natural experience that I’ve ever had
and it’s given me a whole new
appreciation for nature and for life in
general I started to notice the water at
my local surf break tasted a little bit
funny after a heavy rain I found out
there was an old landfill up the road
that released toxic waste into the
stream which flowed down into the oceans
and amongst us and the marine life that
we shared them with at the time I was
producing laser and vinyl cut signs from
petroleum-based plastics for every logo
we stuck on a car or building we would
send about 6 times that amount of non
biodegradable waste to landfill when we
were busy this probably equated to a ton
every couple of months a truck would
pick it up and take it away out of sight
and out of mind
or so I thought I started to look for
alternatives but there weren’t any so I
started to reconsider my life my career
choices a few weeks later I’d into one
of my surfboards on some rocks it wasn’t
until I went to repair it that I
discovered it was made from polyurethane
foam and polyester resin these materials
are carcinogenic toxic and non
biodegradable which means they last
forever in the landfill and are bad for
the people that work for them but they
work with them and bad for the
environment I also discovered that the
majority of surfboards sold in New
Zealand were either imported as a
finished board or as a blank which is
essentially an oversized surfboard that
the local shapers will cut down to the
finished dimensions and and wrap in
fiberglass and and risen an average
surfboard weighing only three kilograms
will emit 300 kilograms of carbon
dioxide in its lifetime
this completely contradicted what
surfing meant to me so I thought I try
and make my own surfboard from wood
using the laser cutter at work after
doing some research I discovered that
the first surfboards were hollow and
made entirely from timber up until
around the mid 1950s when polystyrene
was invented
this new material was quickly adopted
because it was a lot cheaper lighter and
it was easy to work with
I was curious I guess to see if I could
use the fancy machines that we had at
work to make a traditional-style
Hollywood and surfboard that would
compete on both performance and price
with these new engineer materials I got
really close and then the importer of
this Italian player that I was using ran
out of stock at the time I thought this
was going to be a huge setback but it
was actually the best thing that could
have happened over the next couple of
months I met two Kiwi blokes who showed
me what it truly means to run a
sustainable business and how ignorant
that I was to think it simply meant to
just make things out of wood they showed
me running a sustainable business was
about developing local solutions for
local problems whilst having a holistic
perspective of everything that comes in
and out of their business and how all
these little transactions affect the
people in their local community the
environment and their bottom line my
first task was to find alternative
supplier of timber other board makers
around the world were using Polonia
Polonia is a light strong word that is
rot resistant in salt water which makes
it perfect for surf or construction this
is when I met Graham now Graham runs a
dairy farm in the Waikato that’s right
next to one of the country’s best trout
fishing rivers when he realized the
effects that his dairy farm were having
on the nearby waterways he planted rows
of Polonia trees 60% of rivers in New
Zealand are deemed unsuitable due to
livestock runoff by strategically
combining agriculture and forestry
Graham is able to capture and harvest
his cows waste which is good for the
trout and it’s good for the people that
eat them it’s good for the rivers and
the oceans but it’s also good for grain
because he makes more money now per acre
than he ever did farming just cows the
skeleton-like structure that we
previously devised had strength issues
in the hollow sections so we would fill
these the impact areas with bits of
broken surfboards this worked and it
kept a few boards away from landfill
it was quite time-consuming teaming with
this guy Richard up at the Perot tip
what a legend
so Richard drives around Wellington
picking up polystyrene packaging from
fish restaurants and other retailers he
takes it all the way and he mulches it
all up into small chips which he then
ream olds into the large slabs like this
one here of perfectly good polystyrene
foam essentially he devotes the majority
of Winton’s polystyrene waste away from
landfill and sells it to people like me
to give it a new life this material
makes the core of our boards as you can
see it’s it’s full of imperfections but
we cover them all with grains beautiful
timber this method of board making is
known as sandwich construction and it
involves combining low and high density
materials together with a layer of fiber
in between the result is an extremely
strong and light surfboard that won’t
ding or break which means they last a
lot longer and require a lot less
maintenance in order to make a big part
of my job is to tailor the shape and
size of these surfboards to the shape
size and ability of the surfers but in
order to do this in this type of
construction i had to build some pretty
fancy machines so after the last over
the last 18 months I’ve been working on
a reconfigurable mold inside a vacuum
press this machine interprets the
curvature of the customers unique 3d
model and it replicates it across a
fixable bottom sheet we cut all the
components flat here’s one of the cause
as you can see it hasn’t got any curve
in it and then as we glue the components
together we start to introduce the curve
and the final process is to glue the
timber on which goes on top and once the
glue is dry so that will occurs inside a
vacuum press so the vacuum sucks all the
air out applies an even pressure once
the glue is dry the borders essentially
set to the shape and ready to be to be
shaped and the finished product ends up
looking a little bit like that chuck
some wax on it and she’s ready to go
[Applause]
so so at the moment we shape all our own
boards but what we really want to do is
work with the talented shapers all
around New Zealand so that they can
provide their customers with an
environmentally friendly alternative to
the imported blanks that they’re
currently using producing a surfboard
it’s quite a wasteful process and it’s
almost impossible to not generate waste
in the production of the boards but
that’s not to say the waste can’t either
be repurposed or recycled we save all
our off cuts of polystyrene and put them
in this big bag when it’s full we take
it out to Richard paying $25 and he
recycles it into the future the next
batch of blocks we save all that thin
offcuts of Polonia to make federal like
our business cards and and these gift
vouchers and we’re working with Chris
who’s a local body surfer to make these
beautiful hand hand planes for my larger
offcuts
we also save all our trimmings of
fiberglass to make funds all in an
attempt to better serve the people in
our local community the environment and
our bottom line I recently decided that
we would no longer send these boards
overseas limiting our market to New
Zealand this means reduce fuel
consumption but it also means that we
can easily repair any damage they do
incur to ensure they never end up in
landfill instead we’re going to licence
and sell our technology so the other
board makers all around the world can
make surfboards for the local surfers
from locally recycled or locally grown
materials our projections suggest that
this will be more profitable than
exporting boards anyway we were recently
awarded with a gold level eco board
certification from sustainable surf this
has been really good marketing but more
importantly it’s our way of I guess
reassuring our customers that their
buying decisions are having a positive
impact on the planet and when they pedal
out on one of our boards they know the
materials that went into making it I’m
polluting the water beneath them I’m the
shame to admit that I had to taste the
implications of my actions before I
started to change them but nature’s
warning cut signs can be quite subtle
and it’s often easier to turn a blind
eye thank you
you
you
Please follow and like us: