Press "Enter" to skip to content

BLACKSMITH Like A Boss


guys we’ve been working on something big
and we are excited to unveil it in just
a couple of weeks once everything is
ready in the meantime we want to hear
your guesses about what it is the first
person who guesses it correctly will get
it for free post your guesses down in
the comments and start using the hashtag
TKO our Creator
so your guesses are seen on social media
also if you click the link in the
description below you can sign up for
our mailing list so you can get updates
about what’s to come hey guys today we
are here with my friend Joseph and we’re
gonna do something that a lot of you
have asked about we are going to do some
introductory blacksmithing now Joseph
tell us about what blacksmithing
experience you have well I first got
into it when I was 11 by reading books I
found a reference in a book to an old
way the blacksmith’s practice which is
to forge clay which does not require the
hot fire or any of the dangerous stuff
and so it’s a really good way to start
in your kitchen we’ll take some
refrigerated oil-based clay and learn
some basic blacksmithing techniques once
we’ve got those techniques down we will
use our backyard foundry as a furnace
and apply what we’ve learned to some
real iron all right so we are going to
show you a little bit of blacksmithing
with real metal and real fire but then
we’re also going to show you Joseph’s
practicing method where you use
oil-based clay that you have
refrigerated and the tools are the same
tools are exactly the same and the
techniques are exactly the same cool
thing about clay is it’s actually a
really good analog for the way hot metal
behaves and so you can learn how to
forge tapers and to do upsetting to
punch and do all the stuff and it’s
actually less forgiving than iron and so
it’s a really good way to practice and
see where you’re making mistakes
brilliant so alright talk about the
tools
okay so hammers have a couple of
different phases typically you’ll have a
face of a hammer which is flat and then
you have a back end which does something
else this will flatten metal in all
directions and so as you squish the
metal it’s gonna squish this way and
this way the most common type of
blacksmithing hammer is called a cross
peen hammer and this thing is insanely
useful because this back end when you
hit metal with it is only going to
spread metal in this axis and a lot less
in this
access so it’s really good for
stretching out metal in areas where you
want it
you also have straight things which have
the same kind of chisel shape just done
vertically this is a cross beam found
one yeah
this one is a ball-peen you’ve probably
seen this type before and this one is
useful for dishing and making spoons and
it’s more of an aggressive spread of
metal of one kind of point and this is
an anvil what is this made of this is a
Harbor Freight junk anvil do you know is
this iron or steel this is cast iron how
much this is this anvil way this end
looks 55 pounds 5 pounds oh wow so we
have our 55 pound cast iron anvil a
variety of hammers maybe let’s try a
little bit of room temperature play and
then we’ll move to the refrigerated clay
which is more like the actual metal and
then we’ll eventually move up to the
actual melt
oil-based clay and so this is just the
stuff that you can get at like a craft
store yes yes stuff that kids can play
with bright colored stuff and this is
when you we say oil-based we mean that
this is a thick probably about the
consistency of petroleum jelly type of
oil with a substrate in it and it
doesn’t dry out because this has no
water in it to dry out and you could
leave this out for a year and it would
get dusty but it would still be pretty
much the same step 1 take a hammer try
squishing it just to get a sense for how
that goes do you want the most power you
can get with perfect control ah so here
I have tons of control but not much
power here I’ve got loads of power but
like my aims gonna be way off yeah why
because this is room temperature play we
need like no no power so err on the side
of control you’re seeing the divots that
your hammers making use you want to be
aware of those any tilting of your
hammer like this or like this or like
this is going to make dents so when I
when I keep the hammer relatively flat
here I get only very very minor denting
along the edges but but if I and my hand
wrong and then hit middle I suddenly
have this big old crescent-shaped and I
assume in metal that’s kind of hard to
get out yes very much
clay is slightly it’s less forgiving
than metal but you’re going to get the
same effect with metal and so this is a
good way to now you can see I’m
flattening down on
of it and like it’s still visible that
crease I put in there earlier
lift up the clay from the end of the
anvil so you’re gonna want to lift it
every couple of hits okay and actually
so regularly yes remove it from the
interval that does not happen with real
metal okay now try filling at 90 degrees
and stretching this out yeah you’ll
notice that now that this is kind of
spatula shape because you were spreading
the way in this direction in this
direction in this direction it’s not so
much into the bar though exactly and so
now try getting this was gonna the same
we’re gonna rotate it and we’re gonna
try and make equal thickness to this
again yes all right and now you’ll
notice it’s puckering so flip it again
many degrees and now I’ve got like this
chisel shape yeah so do I want to flip
it back to the first flat side or on to
the other side if you flip it on the
other side you’d want to bring it to the
edge of the anvil right here so that you
can maintain that place where it changes
thickness
yeah
I’ve still got kind of this channel
going down the middle is that uh yeah
that’s pretty normal for starting to see
if you could smooth it out as best he
can with refrigerated clay or with hot
metal I would have to be hitting this a
lot harder yes but you don’t severe less
of this you get a trade-off in that it’s
harder to make big mistakes when it’s
harder this is similar to working at a
low red heat when you’re blacksmithing
typically what Smith’s will do is they
will Forge the rough shape and then at a
cooler temperature they’ll take out the
dents and roasted I have a slightly
flatter piece of clay it took me several
minutes with a hammer and an anvil to do
it
the next thing I’d like to show you how
to do is how to make a leaf so what I’m
going to do is I’m going to use this
hammer for most of what I’m doing all
right
and the first thing I’m going to do is
what’s called drawing a taper which
means I want to make this pointy so I’m
going to take my hammer and angle it and
I’m going to angle my clay a little bit
and I’m going to whack it rotating 90
degrees every time so now it’s pointy
and the next thing I’m going to do is
I’m going to hold it over the edge of
the anvil and I’m going to whack right
over the transition between the anvil
and empty space and that’s going to
create that shape that kind of stepped
down see that yes now I’m going to do
the same thing on the other side I’m
going to rotate that this is forming the
so now I’ve got the stem sinner now I’m
going to round off corners by pointing
to corner up to make it into an offbeat
on and now just getting it as smooth and
round as I can so now it’s round but I’m
gonna sit this on the anvil like this
I’m gonna make it flat and I could
finish it there but I’m not going to and
so what I’m gonna do is unstick it now
I’m going to use the cross beam end of
the hammer to rotate out the shape of
the leaf and also put in the definition
in there I’ve got a leaf and then the
last thing you want to do I’m gonna
throw a hammer out there to simulate
having an actual step down here I’m
gonna hold it over this spot right here
I’m going to tap it to give it a little
bit of character and then I’m going to
tap down the tip to make it look a
little more organic there’s a legal
brilliance all right
[Music]
and how long do you have to practice
before your forearm starts having
strength and not getting really sore
very quickly it depends on how much rock
climbing you do not enough apparently
[Music]
frozen clay compared to regular clay my
forearm is already sore from holding a
hammer so this is gonna get interesting
so same process same process oh my gosh
that’s harder that’s a great point thank
you
do a step down there we go so I’ve got a
bowl of ice and water and salt make this
our sort of reverse forge let the clay
sit in there for a few seconds you’re
doing something with this out of metal
how long would you be throwing back in
the Forge it depends on how thick it is
so the super thin areas like this pot
are going to change temperature faster
so they don’t have to go in for very
long if you’re doing something really
thick you can wait until you’re an old
man like just forever enough or should I
go thin that’s perfect that’s perfect
now we move onto metal yes like what are
we looking for how do we know when it’s
ready the nice thing about iron is that
it changes colors tell you what how hot
it is so the scale of blacksmithing
color starts at what they call a cherry
red or a low red and then you work your
way up through reddish orange to orange
to reddish yellow to yellow to at that
point the metal actually catches on fire
and so what color are we looking for
orange this is a mild steel bar that
we’ve got right here and so this is
workable all the way down to a really
low red and so anything where it’s
glowing we can hit it so about here this
is this is how far I can grab this
before it starts getting uncomfortably
warm it is warm I mean this part’s warm
back here like there’s quite a heat
difference between right there and right
there so I feel pretty safe holding it
right here you do notice I have bare
hands that helped me feel how the steel
is doing one people once I feel it
cooling off too much under my hand then
I’ll know it might be time to throw it
back in all right let’s see about
got some fun flaking here yeah this is
magnetite now what’s happened is some of
the metal has returned to its poor state
this is the black sand that the Japanese
Smiths used to make their swords except
what do you think Joseph the finest leaf
that blacksmithing has ever seen
probably the best one ever that no one
has ever made a better leaf I like the
definition that you managed to put in
here that’s actually considering how
tired you were from all the stuff we’ve
been doing before that’s not bad for
hammock control and then you managed to
get all the individual steps right all
that to here so that’s awesome and
there’s very very little carps mouths
here so good taper good set down good
today a texturing well done
intro to blacksmithing is actually
pretty simple we’ve shown you a couple
of different ways of how to make forges
that you could use for this technique
our classic stand up in a bucket Forge
and then our smaller paint can forge
those are both things that would work
for this process you just have to have a
little bit of patience plenty of fuel
and a few tools some hammers and an
anvil or no matter which word you decide
to try with exercise lots and lots of
caution rule number one a blacksmithing
even if the metal looks black it is
still hot enough to melt your flesh so
like assume everything’s hot assume
everything’s trying to kill you
be careful with the fire and don’t die
thank you to Joseph for teaching me the
beginning steps of blacksmithing using
the freezing cold clay that works great
as an analogue and then moving up to
steal this steel is probably barely a
step above iron but I made it guys
thanks for watching we’ve always got
more for you to see that box up at the
top will transport you directly to our
last video you should check that out the
other box at the bottom will show you
what YouTube thinks you should be
watching next if you aren’t a subscriber
yet just hit this bomb to get in the
club and that way you never miss out on
the fun you don’t forget to ring that
Bell and we will see you in the next one dr. den
Please follow and like us: