Press "Enter" to skip to content

How to Make an Arrowhead from a Glass Bottle


in this video we’re going to show you
how to make glass arrowheads using the
same techniques that Native Americans
used for hundreds of years hey guys
we’re here with my friend clay today and
he is going to be teaching us how to
make arrowheads
out of glass bottles play how did you
get into this I’ve been into it for
quite a while uh ever since I was a
little kid I found a little Arrowhead in
our yard and thought it was cool I’ve
taught myself how to make it very cool
and so this Arrowhead that I have right
here is one that you made previously
correct now this one is made of obsidian
so obsidian is a volcanic glass
it’s basically nearly the exact same as
glass bottle obsidian is just lava that
cooled really quickly so quickly it just
turned into glass alright and so why is
it we’re using glass instead of obsidian
Rock this glass is a lot easier to work
with obsidian will have all kinds of
other stuff mixed in that can make it
harder to work with so it’s a lot more
impure and I suspect it’s also harder to
get your hands on yes lots of
availability for glass less availability
for actual obsidian but the principles
are the same
and it works pretty much the same way
yeah take that here’s what we’re going
to try the bottom of a glass bottle is
fairly flat and by using a rock and a
piece of a nail we can press little
chips of glass off shaping it into an
arrowhead and sharpening it at the same
time so what do we need to get started
okay the first thing we need to do is
you need to get a bunch of glass bottles
the best ones are the ones that kind of
have a flat bottom so you want to get
rid of all the curved spots you don’t
even have to use glass bottles you can
use pretty much any kind of glass TV
monitors whatever as long as it’s glass
and you have a nice flat section what’s
the minimum thickness you would say we
need uh I’d probably say the best
thickness is probably somewhere around
an eighth of an inch in thickness so
most bottles are about that thickness
cool so first thing when you do is just
get the bottoms right off the bottom we
need to get the bottom off of the bottle
how do you usually did you just take a
hammer to it you can take a hammer to it
if you want or you can actually drop
like a heavy drill bit down and then
just shake it and then the bottom will
just break right off the first thing you
really need is a leather pad you
definitely don’t want glass shards
getting into your hands I
you’re right it isn’t really comfortable
the second thing you need is like a
round stone that’ll help us kind of get
a nice edge formed on the bottle and on
the arrowhead and then you also need a
pressure flaker so what we’re gonna do
is we’re gonna put a nail into a dowel
and sharpen the point that’ll allow us
to pressure flake off the edge of the
glass and shape the arrowhead the Native
Americans would use antler for this we
could also do that but I found a steel
nail works really well too
either nails are a lot harder than I
knew or we really need to replace this
blade so now I need to make these pointy
right yes it’s a good file you have a
file better than the saw it’s not needle
sharp like I can press on it it’s not
stabbing into my finger right now but I
can feel that it’s very pointy as I
press it onto my finger so now we can
see I have a slightly more sharp and a
slightly less sharp I assume the shape
of my piece of leather isn’t really
important no not really
alright well yours just looks better
than mine so I’m at least going to trim
off some of my extra random extensions
we’ve got our leather we’ve got our
rocks we have our pointy tools do these
have a name or do we just call them
pointy tools up pressure flaker pressure
flaker I think now we need some glass
right yep alright you said that we want
to choose a glass bottle that has a
mostly flat bottom to it does the color
make any difference the color doesn’t
make any difference whatsoever so just
choose your preference alright let’s go
outside so that all of our glass is not
in the workshop where I’m gonna end up
cutting my hands on it later that is
stabbed into my finger like it’s
obviously stabbed through the glove I’m
just telling you it’s also stabbed into
my finger glasses sharp kids and adults
just it’s really sharp it doesn’t matter
if you’re a kid or an adult oh after
cracking a couple of our glass discs in
half we grab a couple more bottles we’re
gonna just do the same thing well it it
broke alright here’s here the stone oh
now you’ve got the bottom so I was
worried with the drill bit since this
was a large flat bottom that if it hit
in the center that it would crack
lengthwise instead of breaking the
bottom off all right clay we both have
our glass bottle bottoms what’s the next
step so the first thing we need to do is
make a nice edge along the base of the
glass here are we just going for round
or are we trying to get the Arrowhead
shape already we’re just trying to get
rid of like this curved edge along the
bottom so like all of the ridges and
stuff exactly exactly all right and so
for that we kind of want to use eye
protection I’ve gotten glass in my eye
once it’s not fun and not worth it
doesn’t sound fun now the goggles I have
are very very stylish these are welding
goggles and it would be too dark but
don’t worry pops up like that so I get
to look full on mad scientists yeah I’m
not really able to break it right what
am I doing wrong
to get it to go all the way around that
curve or what I would do on this one
you’ve already kind of got an edge I
might even just go straight to the
pressure plate crown this one you use
your tool and you just push against the
edge and then a glass little little
flake off this little lip where it turns
back up we’re still trying to remove
that curve exactly
so you recommend I push on this side in
that way that direction yes to get rid
of that edge so I have taken off most of
that edge but I now have almost like a
different curved edge that I’ve put into
it and that’s okay do I just go at it
from the other side now and kind of take
you down the other way exactly that’s
what I would do so what you really want
to do is actually dull the edge but also
you want to make a nice platform for you
to make pressure flakes on so in order
to do that you want a curved edge on the
opposite side that you’re actually
pushing but you want it to be a convex
curve instead of a concave which was
kind of right here so you can kind of
see anything yeah just kind of scraping
down the sharp edge mm-hmm so it’s flat
rough surface and you can actually just
kind of grind it down because what
happens is when you try to pressure
flake on a sharp edge it’ll just kind of
break
the edge off but if you have a dull edge
then you can grab more of the surface
and then pull large flake off make it
dull so you can make a sharp exactly and
if you were in a real survival situation
you know you found a chunk of obsidian
or just a piece of glass somewhere you
didn’t have this nice nail and a stick
with a small stone you could still kind
of make a nice cutting edge for I don’t
know if you had to cut up some game or
or what-have-you and right now we’re
kind of bit working on making Arrowhead
type pieces can the same principle be
used for making knife type pieces I
assume yeah yeah exactly just need a
bigger flat piece and exactly more time
yeah at this point I’ve gotten my piece
of glass too
most of the curve removed and there’s a
jagged edge going all the way around
I’ve napped across most of the surfaces
the concave and what used to be convex
surface so what’s my next step
dull the edge like you’ve been doing and
kind of make a platform on one side so
like this point I would make a platform
probably on this side and push flakes
across this direction or vice versa and
just keep doing that like I would do
that on this edge here and then I would
do it kind of on this edge here and
maybe over here and eventually are going
to end up with kind of an arrowhead
well I was making my arrow head things
are going really nice and then somehow I
managed to drop it tip of the arrow head
broke off I think I’m just gonna finish
it up as though it were this same size
so I can at least just like place the
tip of it next to it and see what it
looked like when it was intact now what
I need to do is add some notches on the
back where I can use a cord or something
to attach the arrow head on to an arrow
the notches are gonna be put in about
the same way we’ve been doing the rest
of the shaping which is just to chip off
flake off little bits at a time and just
sort of tunnel your way in chip a little
bit on one side and then chip a little
bit on the other side trying very hard
not to break the back of the arrowhead
off which I will try I haven’t done this
before so we’ll see how it goes made
from glass bottles we now have a couple
of completed arrowheads Native American
style well other than they’re from glass
bottles
the Native Americans not have glass box
they did not I got a study history a
little better so yeah they used obsidian
or Flint or other types of rock that did
tend to chip in a similar way we have
the advantage of glass which while it
breaks in a similar method is often a
lot cleaner and more pure in its formula
so it breaks predictably making it a
better thing to practice on mine of
course as I showed the tip of it broke
off I just used a small drop of super
glue glue it right back on the two
pieces of glass fit together so nicely
you can’t hardly even see the division
line probably not as good for hunting at
this point yeah but it looks good so one
really cool thing about glass is when it
breaks it actually is sharper than steel
it’ll almost go down to the atom scale
when it breaks so these are actually
really effective points even though
they’re quite fragile and we probably
only be single use now clay you’ve got a
bunch of different varieties of glass so
you don’t always use a glass bottle for
this too you know you can actually use
just about anything that’ll break so
these are obsidian pieces this is
actually pieces of from like an old TV
screen some artificial man-made glass as
well this one’s got glitter pretty shiny
then I got some cuts make skeezer
interesting swirls of color psychedelic
arrowheads right there and some nice
clear blueish glasses would be pretty
Moodle I think yeah good thickness it’s
pretty easy to hit up your local thrift
store and find some old class dishware
very cool right here I’ve got an olive
oil bottle that not only has a fairly
flat bottom but the size of it are also
flat so you could probably break this up
don’t you get several arrowheads out of
it yeah this one you could probably
easily get eight or nine arrowheads just
from the sides glass jars from food can
also work really well just know tempered
glass that’s the only thing that really
wouldn’t work for this just shatter into
a bunch of pieces huh yeah okay special
thanks to our friend clay for coming out
and showing us how to make arrowheads
out of glass bottles clay has helped us
out on a couple of our previous rocket
videos and we hope to collaborate with
him again in the future with some more
guys there’s still more for you to see
the box up at the top will transport you
directly to our last video you should go
check that out the box at the bottom
will show you what YouTube thinks you
need to be watching next and this bum in
the middle will subscribe you to the
channel so you never miss a video don’t
forget to ring that Bell and we’ll see
you the next one talk to them [Music]
Please follow and like us: