Press "Enter" to skip to content

Dehydro-Tron 5000: Make Beef Jerky at Home!


in today’s video we’re gonna show you
how to make a food dehydrator it can be
used to make a number of tasty snacks
and it’s built from a cardboard box a
light bulb and a small fan to start off
with the build of this food dehydrator
we’re going to want a cardboard box some
aluminum foil and some strong tape if
you have some of this metal tape that
will work the best but if you don’t have
any of this other strong tape like duct
tape will work as well there’s no
specific size or shape of cardboard box
that you need but I have this one
because it fits really well with the
racks that will fit in the side of it
this box used to hold reams of paper and
if you don’t have one lying around I
went to a store that sells paper and
they sold this box to me for a dollar
this is a 250 watt heat lamp bulb and
this is an old cooling fan from a
computer if you don’t have one you can
buy a heat bulb at most hardware stores
for about 10 bucks sometimes they have a
red color to them but they’ll work just
the same as this one here’s the basic
idea of how our food dehydrator will
work both of these will be inside our
box which would be lined with foil the
heat from the lamp will be circulated by
the air from the fan and that will swirl
slowly around the food that we’re
dehydrating drying it out the first step
will be to use our aluminum foil and our
tape to line the inside of the box and
the inside of the lid with the foil
there we go the inside of our box in our
lid is now completely lined with foil
and you can see how shiny and reflective
it is in there that’s really gonna help
the heat bounce around and not get
absorbed by the cardboard of the box now
it’s time to move on to adding the fan
and the heat lamp this fan came out of
an old computer and runs on 12-volt DC
current to power this 12-volt DC fan I
went to the local thrift shop and just
bought a used power supply this power
supply has an output of 12 volts DC
current so it should run our fan just
perfectly before we permanently solder
anything together let’s just do a quick
test to see if our power supply is
working I’ve got it plugged in right now
I think this will only work one
direction with the wires well let’s work
in that direction definitely getting the
breeze off of that so now we can solder
those together to make the connection
[Music]
our fan is wired and ready to go so now
we need to install it in the box and
we’re actually going to keep the box
oriented like this our lid isn’t going
to work as a lid but instead is going to
work as a door so we want our fan
installed into the side of the box and
since this is going to be the bottom
we’ll put the fan right here I’ve got it
elevated up from the edge just a little
bit to avoid the overlapping piece of
cardboard here it doesn’t really matter
exactly where you put it as long as it’s
with the hole cut to the fan it may be a
good idea to take a little bit more tape
and tape down these edges if you’ve cut
the hole to the right size the fan
should fit nicely into place now that
we’ve got the fan installed we want to
install the heat lamp on the other side
of the box to power the heat lamp I have
this cord that’s just a cord on one side
and a lightbulb socket on the other and
this would work if we didn’t want an
on/off switch or the ability to choose
how much power came out of this bulb but
I want both of those things I want to be
able to turn off the light and I want to
be able to turn it down so here I have a
rotating dimmer switch we’re going to
install this into the middle of the
power cord these two wires are the
positive and negative lines and we’ll
have one of the wires running through
our power cord connect into one side and
out the other I’ve cut the power cord
for the light bulb and expose the ends
of the two wires so we can now sort them
in line with the lights which will
solder the two black wires back together
and then we’ll take the white wire and
have that split so it connects to the
red wire on one side of light switch and
looks like it’s working to me now before
I saw it or anything in place we do need
to run this wire through the other wall
of this box otherwise we would have to
have a really big hole for the light
bulb to fit in and out so let’s cut a
hole just large enough for this cord to
beautiful heat lamp is now on a dimmable
circuit and we can turn it off there’s a
very good chance that we could use the
heat lamp in our box just like this and
nothing would ever be a problem with it
but just to be sure we don’t have too
much heat passing from the bulb through
the foil into the cardboard let’s use a
little bit of a hanger to build a stand
that will hold our bulb up off of the
foils just a little bit this sort of
double em shape does a good job of
holding the bulb off of the bottom of
the box which should allow circulation
all around it and prevent any
overheating the dehydrator is coming
along nicely and at this point what it
needs is somewhere to put the food
that’s being dehydrated these cooling
racks I got at Walmart for about three
dollars and fifty cents each work great
these racks are one of the reasons I got
this size of box they fit really nicely
in with just a little bit of extra space
to spare and there’s enough clearance
above the light bulb that we can easily
fit two racks in here one on top of the
other to be able to hold the racks right
where we need and still be able to take
them in and out of our dehydrator
whenever we want let’s use a couple of
dowels running across our whole
[Music]
I’ll put one rack about this high and
the other one maybe an inch and a half
as you can see these racks do extend
slightly beyond the front of this box
but we don’t have to put this lid on all
the way it overlaps with the main body
of the box 3 inches normally and we just
don’t need it to do that as long as it’s
covering the openings it’s going to work
just fine
tilt the lid stay in place approximately
where we want it let’s use a little bit
of tape as a sort of hinge on one side
[Music]
our dehydrator is just about ready to
use there’s just a couple more small
improvements we can make first off we
want that pan to actually be circulating
the air and not just be spinning in dead
space so let’s cut several small holes
into the top of our box this will help
the air come in one side travel up past
the food carrying away any excess
moisture and out the top the dehydrator
would work great just as it is but to
contain our switch and to keep it from
flopping around and just lying wherever
on the table let’s grab a scrap of
cardboard and build a box that it can
sit on to hold all of the excess cord
and so we just have a nice place where
at this point our dehydrator box is
complete the whole thing’s lined with
foil we have a fan we have a light
that’s on a dimmer switch and all we
need to do is pick our food and put it
in with the front of the box closed I
can feel the air coming up out of the
holes we’ve cut into the top and once we
turn on the light the air inside will
start heating up to make our dehydrator
look just a little bit less like a
cardboard box we’re going to hit it with
a layer of paint
obviously this level of decoration is
not necessary to make it work it will
dehydrate your food just fine without
any changes to it even if it just looks
like a cardboard box really quick let’s
take a look at some of the things that
we can make with our dehydrator on five
thousand I’ve got three different things
here that I’ve dehydrated at home and it
worked really well I’ve got some
pineapple which I covered in sugar
before putting in the dehydrator some
apple slices which I just sliced in
pieces put on the rack and then left it
overnight and I have some beef jerky
there are tons of good recipes for
making beef jerky at home using a
dehydrator it’s fast it’s easier in its
way cheaper than buying it at the store
wishing there is still more for you to
see well you’re in luck that little box
up at the top will transport you
directly to our last video go check it
out the box at the bottom will show you
what YouTube thinks you should be
watching next this balm in the center
will subscribe you to our channel so you
never have to miss another video don’t
forget to ring that Bell and we’ll see you in the next one talk to you then
Please follow and like us: